KBO12-P

€29.48

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1003067

Manufacturer: INA

Weight: 0.03 kg

Product information "KBO12-P"

Linear ball bearing KBO.. for shaft guidance systems, machined range, open design - segment cut-out, outer ring hardened and ground, high-precision guidance in plastic cage, one side sealed, INA

Bore diameter:	12
Outer diameter:	22
Lenght:	32
Sealing:	seal on one side
Material:	standard

Similar products

Sold out

GCL22-R6-SW

Full complement single row track roller GCL.. with threaded stud, with optimized cylindrical outer ring, concentric, without seals, incl. lock washer and nut, Nadella

Price on request

FRR22-EU-AZ

Euroroller FRR..-EU-AZ with double row angular contact ball bearing, pin with through-hole in inner ring, light convex raceway side, eccentric, with NBR seals type RS on both sides, Nadella

€86.03

GCRL22-EE-SW

Full complement single row track roller GCRL.. with threaded stud, with optimized cylindrical outer ring, eccentric, with plastic seals, incl. lock washer and nut, Nadella

Price on request

Sold out

KM1-E

Lock nut KM..-E, for locking of roller bearings on shafts, with four slots on the circumference for locking with lock washer MB.., metric left-hand thread, BGL

€4.38

Details

NK14/20-XL

Needle roller bearing NK.., light series, open single row design, ribs on outer ring, without inner ring, steel cage, INA

€9.69

RNA4900-XL

Needle roller bearing RNA49.., single row, outer ring with two ribs, without inner ring, steel cage, open design, INA

€11.12

Sold out

NAO9X22X12-TV-XL

Single row needle roller bearing NAO.., radial needle roller bearings, non-locating, without ribs on outer ring, with inner ring, non-self-retaining, polyamide cage, open, INA

€13.90

Details

Sold out

KR22-X-B-NMT

Stud type track roller KR..X without eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with cylindrical profile, gap seals on both sides, incl. nut and lub. nipple, INA

€34.52

Details

30/8-B-2Z-TVH

Double row angular contact ball bearing 30.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, steel shields on both sides, FAG

€18.12

HF1616-L564

Drawn cup roller clutch HF.. without bearing support, one-way clutches, plastic springs (KF), knurled outer surface, without sealing, to combine with drawn cup needle roller bearings HK and BK, INA

€11.97

DPHS08

Standard rod end DPHS.. with pressed spherical plain bearing, sliding pair steel-brass, series K, female right hand thread, zinc plated, relubricatable, Durbal

€6.29

Sold out

R067001256

Super linear bushing KBA-12 with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, without wiper seals, Rexroth

€28.53

Details

GLE12-60-500

Heavy-duty spherical-plain bearing GLE.. in stainless steel, sliding combination steel - DURBAL-Glide (polyamid-PTFE-fibreglass-compound), series E, maintenance-free, Durbal

€32.34

Sold out

R074021230

Standard linear bushing KBMF-12-DD-NR with square flange, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€112.48

Details

E106-ZZ

Profiled guide roller E..-ZZ with pin, double row bearing, eccentric, steel shields on both sides, incl. lock washer and nuts, CTS

€21.89