KH30-PP

€14.17

Ready for immediate despatch: 290

Ready for dispatch within 3-5 working days: 2500

Product number: 1003261

Manufacturer: INA

Weight: 0.09 kg

Product information "KH30-PP"

Linear ball bearing KH.. for shaft guidance systems, compact range, outer ring machined, hardened, perforated, with ball and cage assembly integrated in plastic cage, seals on both sides, relubricatable, INA

Bore diameter:	30
Outer diameter:	40
Lenght:	50
Sealing:	seals on both sides
Material:	standard

Similar products

FRR40-EU

Euroroller FRR..-EU, with double row angular contact ball bearing, light convex raceway side, eccentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella

€88.34

GYE12-XL-KRR-B

Radial insert ball bearing GYE.., spherical outer ring surface, grub screws in inner ring for location on shaft, compensating for misalignment, sealed on both sides, with plastic cage, relubricatable, INA

€14.24

Sold out

FRLR40-EU-NX

Corrosion-resistant floating guide roller FRLR..-EU, with double row angular contact ball bearing, light convex raceway side, eccentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella

€211.39

Details

203-XL-KRR-AH02

Deep groove ball bearing 2..-KRR, radial insert ball bearing with cylindrical outside surface of the outer ring, width inner ring with cylindrical bore for fit, sealed on both sides, with plastic cage, INA

€12.89

Sold out

PFP40

Cam follower PFP.., with reinforced smooth stud design, with convex outer ring, seals on both sides, Nadella

Price on request

ROTEX 19 ALU - MatNr: 020196102000

ROTEX 19 ALU hub 1.0 Ø20H7 key DIN 6885/1-JS9 > component 1a - #020196102000, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€15.54

Sold out

R060202530

Standard linear bushing KBM-25-DD-NR, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, stainless steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€124.93

Details

ROTEX 19 ST - MatNr: 020195122280

ROTEX 19 ST hub 1.0 Ø22,225+0,0254 key code G > b=4,762+0,051 (ANSI/AGMA 9002-C14 Ø7/8"x3/16") component 1a - #020195122280, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€18.38

7203-B-XL-TVP-UA

Angular contact ball bearing 72..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG

€22.02

ROTEX 19 ALU - MatNr: 020196100050

ROTEX 19 ALU hub Ø18 pilot bored component 1a - #020196100050, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€7.14

IR35X40X30-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€11.47

Sold out

R150224085

Single nut with flange, FEM-E-C 25X10RX3-4, Ball screw assemblies, sealed, Rexroth

€399.41

Details

Sold out

GC40-EEM-SW

Full complement single row track roller GC.. with threaded stud, profiled outer ring with optimized radius, concentric, metal shielded, incl. lock washer and nut, Nadella

€122.89

Details

K35X40X26-ZW-A/0-7

Needle roller cage assembly K.., radial needle roller bearings for direct bearing arrangement, DIN 5405-1/ISO 3030, double-row design, cage made of sheet steel, open, INA

€13.15

Sold out

DSA15-ES-2RS

Standard rod end DSA..-ES with pressed spherical plain bearing, sliding pair steel-steel, series E, male right hand thread, zinc plated, with lip seals on both sides, relubricatable, Durbal

€10.96

Details