KR32-EE

€12.87

Ready for immediate despatch: 13

Product number: 1000645

Manufacturer: NRB

Weight: 0.12 kg

Product information "KR32-EE"

Stud type track roller, with axial guidance, concentric, sealed on both sides with plastic axial plain washers, NRB

Outer diameter:	32
Lenght:	40
Sealing:	seals on both sides
Thread size:	M12x1,5
Cage:	steel cage
Material:	standard

Similar products

B7201-E-T-P4S-UL

Super precision angular contact ball bearing B72..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

€90.50

BRM12-60-502

Heavy-duty rod end BRM.. in stainless steel, with integral self-aligning ball bearing, series K, male left hand thread, cage design, with shields on both sides, relubricatable, Durbal

€151.81

Sold out

R067122045

Super linear bushing KBA-O-20-VD with misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with complete sealing, Rexroth

€52.06

Details

Sold out

LM20-UU-S

Closed standard ball bushing (linear ball bearing), standard, plastic cage, stainless steel balls, seals on both sides, Samick

€15.00

Details

WLK12-00-500

Heavy-duty spherical bearing WLK.. with integral self-aligning ball bearing, full complement design, with long-term greasing and shields on both sides, Durbal

€83.22

Sold out

R073212040

Super linear bushing KBH-20-D for high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth

€62.66

Details

6002-2RSR-C3

Single row deep groove ball bearing 60.., radial, with steel cage and contact seals on both sides, FAG

€2.67

EM12-60-501

Heavy-duty rod end EM.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series E/EH, male right hand thread, maintenance-free, Durbal

€38.17

Sold out

R074022035

Standard linear bushing KBMF-20-DD-NR SP with square flange, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€162.67

Details

7201-B-XL-TVP

Angular contact ball bearing 72..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG

€11.18

BEFN12-20-502

Heavy-duty rod end BEFN.. with pressed spherical-plain bearing, sliding pair steel-brass, series K, female left hand thread, zinc plated, relubricatable, Durbal

€24.01

PAP2820-P10 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€4,351.43

NKI20/16-XL

Needle roller bearing NKI.., light series, open single row design, ribs on outer ring, with inner ring, steel cage, INA

€15.89

LR4

Adjusting nut LR.., spring nuts for precise adjustment, radial locking, standard clamping system with a clamping screw on spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€72.55

PAP2830-P200 - 50x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€215.42