KRE16-EE

€46.51

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1067669

Manufacturer: Nadella

Weight: 0.02 kg

Product information "KRE16-EE"

Cam follower KRE.. with pin and eccentric collar, with cage-guided needles and convex outer ring, plastic seals on both sides, with screw driver slot, incl. clamping nut, Nadella

Outer diameter:	16
Lenght:	28
Thread size:	M6x1
Material:	standard

Similar products

KR16-PP-A

Stud type track roller KR.. without eccentric, outer ring profile optimized, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, INA

€27.78

LR605-2RSR-HLC

Single row track roller LR6.., deep groove ball bearing based, without pin, thick-walled outer ring with crowned lateral surface of R=500mm, with plastic cage, lip seals on both sides, INA

€16.46

Sold out

R074050800

Standard linear bushing KBMF-8-DD with square flange, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€36.28

Details

DPHS05

Standard rod end DPHS.. with pressed spherical plain bearing, sliding pair steel-brass, series K, female right hand thread, zinc plated, relubricatable, Durbal

€5.40

GLE08-20-500

Heavy-duty spherical-plain bearing GLE.., sliding combination steel - DURBAL-Glide (polyamid-PTFE-fibreglass-compound), series E, maintenance-free, Durbal

€19.64

NATR5

Yoke type track roller with profiled outer ring (contact optimized surface), with inner ring and needle cage, without seals, IDC

€12.35

CLK350 6,35x16

High-quality internal clamping set CLK350, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting with axial hub displacement, for low to medium torques, CMT Line

€15.96

Sold out

GC16-EE-SW

Full complement single row track roller GC.. with threaded stud, profiled outer ring with optimized radius, concentric, with plastic seals, incl. lock washer and nut, Nadella

€61.33

Details

FRNR22-EI

Guide roller FRNR..-EI with needle roller bearing, with threaded stud, slighly convex raceway sides, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€89.91

Sold out

ET1216

Radial seal ring, ET.. series, for sealing needle roller bearings, made of sheet steel-reinforced elastomer, Nadella

Price on request

NKI6/12-TV-XL

Needle roller bearing NKI.., light series, open single row design, ribs on outer ring, with inner ring, plastic cage, INA

€10.05

NATR5

Yoke type track roller NATR.., single row, thick-walled outer ring with profiled surface, axial guidance via thrust washers, with inner ring and needle roller and cage assembly, gap seals on both sides, INA

€15.81

KR16

Stud type track roller KR.. without eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with crowning profile R500, gap seals on both sides, INA

€26.33

KRV16-PP-A-NMT

Stud type track roller KRV.. without eccentric, outer ring profile optimized, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€30.87

Sold out

R060230856

Standard linear bushing KBM-8-DD, linear bushings, closed robust all-metal design, hardened and ground sleeve, guide cage made of PA/POM, with two integrated wiper seals, ungreased, Rexroth

€23.55

Details