KRE35-B

€65.76

Ready for dispatch within 3-5 working days: 23

Product number: 1047398

Manufacturer: INA

EAN: 4054362446446

Weight: 0.18 kg

Product information "KRE35-B"

Stud type track roller KRE.. with eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with crowning profile R500, gap seals on both sides, INA

Bore diameter:	16
Outer diameter:	35
Lenght:	52
Thread size:	M16x1,5
Material:	standard

Similar products

NUTR15-A

Yoke type track roller NUTR.., with profiled outer ring (contact optimized surface), inner ring and flange rings, full complement roller set, labyrinth seals on both sides, INA

€37.18

NATV15

Yoke type track roller with profiled outer ring (contact optimized surface), with inner ring, full complement needle set, without seals, IDC

€24.59

RNAO25X35X17

Single row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, without inner ring, non-self-retaining, steel cage, open, INA

€17.41

LFR5201-10-2RS-RB

Corrosion-resistant locating bearing track roller LFR5.., profiled track rollers, double row angular contact ball bearing with gothic profiled groove in outer ring - 2-point contact, with plastic cage and seals on both sides, INA

€37.95

16003-A

Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€5.65

CLK250L 22x35

High-quality internal clamping set CLK250L, backlash-free shaft-hub connection, self-centering design: radially flat - axially long, mounting with axial hub displacement, for low to medium torques, CMT Line

€16.76

KRV35-B-NMT

Stud type track roller KRV.. without eccentric, solid roller pin, full complement, with axial guidance, outer ring with crowning profile R500, gap seals on both sides, incl. nut and lub. nipple, INA

€50.17

ASNU8 - USNU8

Built-in roller freewheel USNU.., dimensions according to ball bearing 63.., non self-centering (non bearing supported), one keyway on the inner ring, CTS

€81.84

GS81104

Housing locating washer GS811.., thrust bearing washers, externally centered, made from through-hardened rolling bearing steel, raceways precision ground, bore and outside diameter precision machined, INA

€6.48

Sold out

RNA1017

Full complement needle roller bearing RNA1.., solid and through-hardened outer ring, without inner ring (for combination with inner rings BI.., BIC.., BICG..), without lubrication hole and groove, Nadella

€45.11

Details

3202-BD-XL-2Z-TVH

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, with plastic cage, steel shields on both sides, FAG

€22.68

Sold out

FRR52

Guide roller FRR.., special rollers, two separate modified ball bearings, eccentric, sealed, incl. lock washer and nuts, Nadella

Price on request

Sold out

3202-BD-XL-2HRS-C3

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, with steel cage and contact seals on both sides, FAG

€29.56

Details

PFV60.30

Ball bearing guide roller PFV.., version with "gothic arch" profile, concentric, with NBR seals type RS on both sides, incl. lock washer and nut, Nadella

€128.70

Sold out

NJ202-E-XL-M1A

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with outer ring rib-guided two-piece brass cage, FAG

€48.75

Details