KRE52-PP-A

€87.62

Ready for dispatch within 3-5 working days: 183

Product number: 1047406

Manufacturer: INA

EAN: 4012802185935

Weight: 0.49 kg

Product information "KRE52-PP-A"

Stud type track roller KRE.. with eccentric, outer ring profile optimized, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, INA

Bore diameter:	20
Outer diameter:	52
Lenght:	66
Sealing:	seals on both sides
Thread size:	M20x1,5
Material:	standard

Similar products

Sold out

GC52-SW

Full complement single row track roller GC.. with threaded stud, profiled outer ring with optimized radius, concentric, without seals, incl. lock washer and nut, Nadella

€144.15

Details

AS3552

Thrust bearing washer AS.., suitable for axial needle roller and cage assemblies AXK.., for use as a shaft or housing washer, stamped, through-hardened, polished, INA

€0.83

EMN20-30-501

Heavy-duty rod end EMN.. with pressed spherical-plain bearing, sliding pair steel-steel, series E/EH, male right hand thread, zinc plated, relubricatable, with lip seals on both sides, Durbal

€41.43

KR52-B-NMT

Stud type track roller KR.. without eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with crowning profile R500, gap seals on both sides, incl. nut and lub. nipple, INA

€67.86

7205-B-XL-TVP-UO

Angular contact ball bearing 72..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG

€28.41

RKXR52-C

Guide roller RKXR.. with tapered roller bearing, with threaded stud, convex raceway side, radius R = 400, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€214.88

NJ205-E-XL-TVP2-C3

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with solid plastic cage, FAG

€23.36

Sold out

22205-EA-W33

Double row spherical roller bearing, series 222, cylindrical bore, steel cage, groove and lubrication holes on outer ring, SNR

€34.30

Details

3808-2RS

Double row angular contact ball bearing 38.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, seals on both sides, INA

€39.28

PM17-00-501

Heavy-duty rod end PM.. with integral self-aligning ball bearing, male right hand thread, with shields on both sides, relubricatable, Durbal

€95.05

NUTR25-X-A

Yoke type track roller NUTR.., with cylindrical outer ring, inner ring and flange rings, full complement roller set, labyrinth seals on both sides, INA

€53.30

6304-2Z

Single row deep groove ball bearing 63.., radial, with steel cage and sheet steel shields on both sides, FAG

€4.27

Sold out

RKU55-V

Guide roller RKU.. with tapered roller bearing, locating roller, convex raceway side, radius R = 400, concentric, with Viton-seals (up to 120°C), incl. lock washers and nuts, Nadella

€210.77

Details

FRLR52-EU

Floating guide roller FRLR..-EU, with double row angular contact ball bearing, light convex raceway side, eccentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella

€116.88

NJ2205-E-XL-M1A

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with outer ring rib-guided two-piece brass cage, FAG

€63.22