KRV47-X-PP-A

€77.50

Ready for dispatch within 3-5 working days: 58

Product number: 1047468

Manufacturer: INA

EAN: 4012802428421

Weight: 0.39 kg

Product information "KRV47-X-PP-A"

Stud type track roller KRV..X without eccentric, outer ring with cylindrical profile, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, INA

Bore diameter:	20
Outer diameter:	47
Lenght:	66
Sealing:	seals on both sides
Thread size:	M20x1,5
Material:	standard

Similar products

Sold out

ZARN1747-L-TV-A

Needle roller axial cylindrical roller bearing ZARN-L with long shaft locating washer, combined axial radial high-precision bearings for screw drives, light series, double direction, without locating holes, INA

€387.30

Details

Sold out

51205

Axial deep groove ball bearing, single direction, separable, NTN

€8.88

Details

Sold out

NJ204-E-XL-M1A-C3

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with outer ring rib-guided two-piece brass cage, FAG

€50.78

Details

NA4906-XL

Needle roller bearing of series NA49.., single row, outer ring with two ribs, inner ring without ribs (removable), steel cage, open design, INA

€25.32

CLK132 22x47

High-quality internal clamping set CLK132, backlash-free shaft-hub connection, self-centering design: radial standard height - short axial width, mounting with axial hub displacement, for high torques, for medium to high torques, CMT Line

€16.36

Sold out

HK4020-AS1-B

Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, single-row non-sealed design, with steel cage, with lubrication hole, INA

€7.50

Details

R067023040

Super linear bushing KBA-30-DD with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with wiper seal on one side, Rexroth

€61.64

PNA25/47-XL

Adjusting needle roller bearing PNA.., with inner ring, single row, outer ring with spherical outside surface in outer sleeve with plastic back-up rings to compensate for misalignment, INA

€41.20

NF15 - UF15

Built-in roller freewheel UF.., non self-centering (non bearing supported), one keyway on the inner ring, CTS

€105.54

GRAE20-NPP-B-FA106

Radial insert ball bearing GRAE.., noise-tested, spherical outside surface of the outer ring, with eccentric locking collar for mounting on shaft, compensating for misalignment, sealed on both sides, with plastic cage, relubricatable, INA

€18.26

DGAL20-UK

Standard rod end DGAL..-UK with pressed spherical plain bearing, sliding pair steel-PTFE, series E, male left hand thread, zinc plated, maintenance-free, Durbal

€19.04

NUTR1747-X-A

Yoke type track roller NUTR.., with cylindrical outer ring, inner ring and flange rings, full complement roller set, labyrinth seals on both sides, INA

€51.93

GC52-EE-SW

Full complement single row track roller GC.. with threaded stud, profiled outer ring with optimized radius, concentric, with plastic seals, incl. lock washer and nut, Nadella

€158.55

204-XL-KRR

Deep groove ball bearing 2..-KRR, radial insert ball bearing with cylindrical outside surface of the outer ring, width inner ring with cylindrical bore for fit, sealed on both sides, with plastic cage, INA

€14.17

DSIL20-ES

Standard rod end DSIL..-ES with pressed spherical plain bearing, sliding pair steel-steel, series E, female left hand thread, zinc plated, relubricatable, Durbal

€14.10