LR608-2RSR-HLC

€15.91

Ready for dispatch within 3-5 working days: 89

Product number: 1047748

Manufacturer: INA

EAN: 4012802844788

Weight: 0.02 kg

Product information "LR608-2RSR-HLC"

Single row track roller LR6.., deep groove ball bearing based, without pin, thick-walled outer ring with crowned lateral surface of R=500mm, with plastic cage, lip seals on both sides, INA

Bore diameter:	8
Outer diameter:	24
Width:	7
Sealing:	seals on both sides
Material:	standard

Similar products

AS1024

Thrust bearing washer AS.., suitable for axial needle roller and cage assemblies AXK.., for use as a shaft or housing washer, stamped, through-hardened, polished, INA

€0.51

BEM08-20-501

Heavy-duty rod end BEM.. with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, male right hand thread, galvanized, maintenance-free, Durbal

€16.67

BEF08-20-501

Heavy-duty rod end BEF.. with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, female right hand thread, galvanized, maintenance-free, Durbal

€16.67

DSI08-T/K

Standard rod end DSI..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, series K, female right hand thread, zinc plated, maintenance-free, Durbal

€6.29

G16X24X3-C

Single-lip sealing ring G.., contacting radial rotary shaft seals, for sealing needle roller bearings, NBR-coated stiffening ring with a rubber shaft profile, INA

€2.36

AXK1024-A/0-10

Axial needle roller and cage assembly AXK.., axial roller bearings, single direction, dimensionally stable cage made from sheet steel, for direct mounting or in combination with axial bearing washers AS.., INA

€1.99

NA6901

Needle roller bearing of series NA69.., single row, outer ring with two ribs, inner ring without ribs (removable), steel cage, IDC

€15.66

KH16-B

Linear ball bearing KH.. for shaft guidance systems, compact range, outer ring machined, hardened, perforated, with ball and cage assembly integrated in plastic cage, without seals, relubricatable, INA

€7.73

CLK300 19x24

High-quality internal clamping set CLK300, backlash-free shaft-hub connection, non-self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

€3.98

BRF08-00-502

Heavy-duty rod end BRF.. with integral self-aligning roller bearing, series K, female left hand thread, cage design, galvanized, with shields on both sides, relubricatable, Durbal

€41.03

NA4901

Needle roller bearing of series NA49.., single row, outer ring with two ribs, inner ring without ribs (removable), steel cage, IDC

€12.98

KH16-PP-RROC

Corrosion-resistant linear ball bearing KH.. for shaft guidance systems, compact range, outer ring machined, hardened, perforated, with ball and cage assembly integrated in plastic cage, seals on both sides, relubricatable, INA

€13.60

G18X24X3-C

Single-lip sealing ring G.., contacting radial rotary shaft seals, for sealing needle roller bearings, NBR-coated stiffening ring with a rubber shaft profile, INA

€2.36

609-HLN

Single row deep groove ball bearing 60.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€1.88

DSA08-T/K

Standard rod end DSA..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, series K, male right hand thread, zinc plated, maintenance-free, Durbal

€6.29