LS4060

Bore diameter:	40
Outer diameter:	60
Height:	3,5
Material:	standard

AX4060

Axial needle roller bearing AX.., thin series, single-row axial needle roller cage with built-in thin washer, Nadella

€14.39

DRS1560

Seal carrier assy DRS for screwing onto ZARF(L) bearings, complete seal kit consisting of: sealing flange, NBR rotary shaft seal, flange seal and fastening screws, light series, INA

€166.83

89306-TV

Double row axial cylindrical roller bearing 893.., combination of roller and cage assembly K893.., housing locating washer GS893.. and shaft locating washer WS893.., single direction, with plastic cage, non-greased, INA

€91.87

PAP5540-P10 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€383.68

PAP5540-P11 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€1,139.85

PAP5540-P20 - 2500x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P20 with steel backing, for grease or liquid-lubricated applications: contains lead, with oil distributing pockets, ready to install, lifetime lubrication possible, low wear, low sensitivity to edge loading, good damping characteristics, insensitive to impact loads, good chemical resistance, KS Permaglide®

€17,034.23

PAP5560-P180 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€806.60

DSAL25-T/K

Standard rod end DSAL..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, series K, male left hand thread, zinc plated, maintenance-free, Durbal

€32.98

BEMN25-20-502

Heavy-duty rod end BEMN.. with pressed spherical-plain bearing, sliding pair steel-brass, series K, male left hand thread, zinc plated, relubricatable, Durbal

€93.41

CLK132 32x60

High-quality internal clamping set CLK132, backlash-free shaft-hub connection, self-centering design: radial standard height - short axial width, mounting with axial hub displacement, for high torques, for medium to high torques, CMT Line

€18.68

ZKLF1560-2RS-XL

Double row axial angular contact ball bearing, precision bearings for screw mounting, with fixing holes, seals on both sides, INA

€320.29

K55X60X20-B/0-7

Needle roller cage assembly K.., radial needle roller bearings for direct bearing arrangement, DIN 5405-1/ISO 3030, single-row design, cage made of sheet steel, open, INA

€10.67

52306

Axial deep groove ball bearing 523.., double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€60.95

PAP5540-P10 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€6,130.80

PAP5540-P200 - 50x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€498.54

Product information "LS4060"