NATR40-PP-A

€93.66

Ready for dispatch within 3-5 working days: 100

Product number: 1048210

Manufacturer: INA

EAN: 4012802422160

Weight: 0.8 kg

Product information "NATR40-PP-A"

Yoke type track roller NATR.., single row, thick-walled outer ring with profiled surface, axial guidance via thrust washers, with inner ring and needle roller and cage assembly, three-stage sealing on both sides, INA

Bore diameter:	40
Outer diameter:	80
Width:	32
Cage:	steel cage
Material:	standard

Similar products

NCF2208-V-C3

Single row cylindrical roller bearing, support bearing, two fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling element, IDC

€75.68

NJ208-E-XL-TVP2-C3

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with solid plastic cage, FAG

€36.35

Sold out

ZM60

Precision locknut ZM, light series, for preloading bearings for screw drives, radially clampable with locking pins, INA

€169.09

Details

NNF5010-PP

Double row cylindrical roller bearing, locating bearing, three fixed ribs on inner ring, one fixed center rib on outer ring, full complement roller set, sealed on both sides, IDC

€96.46

GYE40-KRR-B-FA107-VA-HLA

Corrosion-resistant radial insert ball bearing GYE.., spherical outer ring surface, grub screws in inner ring for location on shaft, compensating for misalignment, sealed on both sides, with plastic cage, relubricatable, INA

€111.20

NA6911-ZW-XL

Needle roller bearing of series NA69.., double row, outer ring with two ribs, inner ring without ribs (removable), steel cage, open design, INA

€93.77

Sold out

NUTR40

Yoke type track roller with profiled outer ring (contact optimized surface), inner ring and flange rings, full complement roller set, labyrinth seals on both sides, IDC

€66.40

Details

Sold out

GRAE40-NPP-B-FA107/125.5

Corrosion-resistant radial insert ball bearing GRAE.., spherical outside surface of the outer ring, with eccentric locking collar for mounting on shaft, compensating for misalignment, sealed on both sides, with plastic cage, relubricatable, INA

€37.63

Details

Sold out

IR70X80X25-EGS

Inner ring IR..-EGS for needle roller bearings, cylindrical, made of hardened rolling bearing steel, surface ground without twist, without lubrication hole, INA

€29.19

Details

Sold out

6208-HT200-ZZ

Single row deep groove ball bearing, sheet steel cage, shields on both sides, temperature up to +200°C, SNR - Topline

€52.82

Details

Sold out

GE40-XL-KRR-B-FA164

Radial insert ball bearing GE.., for temperature up to +250°C, spherical outside surface of the outer ring, with eccentric locking collar for mounting on shaft, compensating for misalignment, lip seals on both sides, with plastic cage, relubricatable, INA

Price on request

NUTR3580-A

Yoke type track roller NUTR.., with profiled outer ring (contact optimized surface), inner ring and flange rings, full complement roller set, labyrinth seals on both sides, INA

€74.61

Sold out

ES208-G2

Bearing insert ES2.. for bearing units, spherical outer ring, fixing by eccentric locking collar, shielded on both sides, SNR

€17.98

Details

E40-XL-KLL

Radial insert ball bearing E..-KLL, cylindrical outer ring, with eccentric locking collar for mounting on shaft, triple lip seals on both sides, with plastic cage, not relubricatable, INA

€47.72

NUKRE80-A

Stud type track roller NUKR.., solid roller pin with eccentric collar, thick-walled outer ring with profiled outer surface, with axial guidance, full complement double-row cylindrical roller set, labyrinth seals on both sides, INA

€168.02