NATV5-PP-A

Bore diameter:	5
Outer diameter:	16
Width:	12
Cage:	full-complement
Material:	standard

PAF14170-P10 - 1000x

Flanged bushing PAF.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€1,006.79

Sold out

GLG06-20-500

Heavy-duty spherical-plain bearing GLG.., sliding combination steel - DURBAL-Glide (polyamid-PTFE-fibreglass-compound), series G, maintenance-free, Durbal

Price on request

PAF14170-P180 - 1000x

Flanged bushing PAF.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€1,044.81

NATR5-X

Yoke type track roller with cylindrical outer ring, with inner ring and needle cage, without seals, IDC

€13.60

PFL16

Track roller PFL.., single row, with reinforced bolt, for high precision and load, cylindrical outer ring, incl. lock washer and nut, Nadella

€57.95

Sold out

GCR16-SW

Full complement single row track roller GCR.. with threaded stud, profiled outer ring with optimized radius, eccentric, without seals, incl. lock washer and nut, Nadella

€72.48

Details

R061030800

Standard linear bushing KBM-E-8, linear bushings, closed robust all-metal design, hardened and ground sleeve, adjustable radial clearance, guide cage made of PA/POM, without sealing rings, ungreased, Rexroth

€21.29

IR12X16X14-IS1-OF-XL

Inner ring IR..-IS for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, with lubrication hole, INA

€5.27

KR16-SK

Stud type track roller KR.. without eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with crowning profile R500, gap seals on both sides, INA

€30.26

KRV16-X-PP-A

Stud type track roller KRV..X without eccentric, outer ring with cylindrical profile, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, INA

€30.87

Sold out

R074050800

Standard linear bushing KBMF-8-DD with square flange, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€36.28

Details

PAP1410-P10 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€815.49

PAP1410-P10 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€80.32

PAP1420-P200 - 50x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€211.92

PAP1420-P180 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€90.29

Product information "NATV5-PP-A"