NKI30/20-TV-XL

Bore diameter:	30
Outer diameter:	45
Width:	20
Cage:	polyamide, hard fabric
Material:	standard

DGIHO-K 16 DO

Hydraulic rod end DGIHO-K..-DO, housing made of forged heat-treated steel, with pressed spherical-plain bearing DGE..-ES, with slot and clambing arrangement, sliding pair steel-steel, female right hand thread, relubricatable, Durbal

Price on request

CLK500 17x45

Rigid shaft coupling CLK500, backlash-free, bending and torsionally stiff shaft-to-shaft connection, self-centering design, mounting without axial hub displacement, for medium to high torques, CMT Line

€27.22

CLK250 35x45

High-quality internal clamping set CLK250, backlash-free shaft-hub connection, non-self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

€14.70

CLK250L 32x45

High-quality internal clamping set CLK250L, backlash-free shaft-hub connection, self-centering design: radially flat - axially long, mounting with axial hub displacement, for low to medium torques, CMT Line

€19.60

CLK250L 35x45

High-quality internal clamping set CLK250L, backlash-free shaft-hub connection, self-centering design: radially flat - axially long, mounting with axial hub displacement, for low to medium torques, CMT Line

€19.60

CLK300 40x45

High-quality internal clamping set CLK300, backlash-free shaft-hub connection, non-self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

€4.10

CLK500 15x45

Rigid shaft coupling CLK500, backlash-free, bending and torsionally stiff shaft-to-shaft connection, self-centering design, mounting without axial hub displacement, for medium to high torques, CMT Line

€27.22

CLK133 45x75

High-quality internal clamping set CLK133, backlash-free shaft-hub connection, self-centering design: radial standard height - short axial width, mounting without axial hub displacement, for medium to high torques, CMT Line

€23.42

CLK500 16x45

Rigid shaft coupling CLK500, backlash-free, bending and torsionally stiff shaft-to-shaft connection, self-centering design, mounting without axial hub displacement, for medium to high torques, CMT Line

€27.22

CLK250 32x45

High-quality internal clamping set CLK250, backlash-free shaft-hub connection, non-self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

€14.70

Sold out

LM30-UU-S

Closed standard ball bushing (linear ball bearing), standard, plastic cage, stainless steel balls, seals on both sides, Samick

€28.00

Details

Sold out

LR9

Adjusting nut LR.., spring nuts for precise adjustment, radial locking, standard clamping system with a clamping screw on spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€75.47

Details

LRE9

Adjusting nut LRE.., spring nuts for precise adjustment, balanced radial locking, clamping system with two clamping screws on two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€112.45

NA69/28

Needle roller bearing of series NA69.., single row, outer ring with two ribs, inner ring without ribs (removable), steel cage, IDC

€35.37

Sold out

RNA49/28

Needle roller bearing of series RNA49.., single row, outer ring with two ribs, without inner ring, steel cage, IDC

Price on request

Product information "NKI30/20-TV-XL"