NKXR17-Z-XL

€47.72

Ready for dispatch within 3-5 working days: 204

Product number: 1049062

Manufacturer: INA

EAN: 4012802632118

Weight: 0.05 kg

Product information "NKXR17-Z-XL"

Needle roller/axial cylindrical roller bearing NKXR.., combined axial radial bearings, without inner ring, single direction axial component with ball cage, retained by protective cap, INA

Bore diameter:	17
Outer diameter:	26
Width:	25
Cage:	steel cage
Material:	standard

Similar products

PAW14-P14 - 100x

Thrust washer PAW.., maintenance-free plain bearing, standard material P14 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, little wear, low friction value, no tendency to fuse with metal, KS Permaglide®

€104.79

DGE12-FW

Radial spherical-plain bearing DGE..-FW, sliding combination steel-steel, lined with bronze-PTFE-composite, series G, maintenance-free, Durbal

€6.99

PAW14-P200 - 25x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€56.89

KR26

Track roller with solid roller stud, with cage-guided needles and profiled outer ring (contact optimized surface), with hexagon socket, without seals, IDC

€23.43

KS16-PP

Linear ball bearing KS.. for shaft guidance systems, heavy-duty series, closed design, angle-adjustable, seals on both sides, relubricatable, INA

€23.50

DL2016

Full complement needle bush DL.., oped design, needles retained, thin hardened calibrated outer ring made of drawn strip steel, without inner ring, Nadella

€12.32

NB182616

Needle roller bearing with double-side ribs, single row, without inner ring, with lubrication groove an bore, NRB

€3.41

NK18/16-XL

Needle roller bearing NK.., light series, open single row design, ribs on outer ring, without inner ring, steel cage, INA

€9.45

HK2012-B

Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, single-row non-sealed design, with steel cage, without lubrication hole, INA

€3.48

51101

Axial deep groove ball bearing 511.., single direction, flat housing locating washer (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€7.75

KRV26-PP-A

Stud type track roller KRV.. without eccentric, outer ring profile optimized, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, INA

€32.64

Sold out

KBO16

Linear ball bearing KBO.. for shaft guidance systems, machined range, open design - segment cut-out, outer ring hardened and ground, high-precision guidance in plastic cage, without seals, INA

€34.22

Details

AXK1226-A/0-10

Axial needle roller and cage assembly AXK.., axial roller bearings, single direction, dimensionally stable cage made from sheet steel, for direct mounting or in combination with axial bearing washers AS.., INA

€2.01

Sold out

R067001656

Super linear bushing KBA-16 with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, without wiper seals, Rexroth

€34.50

Details

Sold out

R061001656

Standard linear bushing KBM-E-16, linear bushings, closed robust all-metal design, hardened and ground sleeve, adjustable radial clearance, steel guide cage, without sealing rings, ungreased, Rexroth

€30.68

Details