Skip to main content Skip to search Skip to main navigation

NKXR30-Z-XL

Product information "NKXR30-Z-XL"

Needle roller/axial cylindrical roller bearing NKXR.., combined axial radial bearings, without inner ring, single direction axial component with ball cage, retained by protective cap, INA
Bore diameter: 30
Outer diameter: 42
Width: 30
Cage: steel cage
Material: standard
Skip product gallery

Similar products

6004-C-2Z
Single row deep groove ball bearing 60.., radial, with steel cage and sheet steel shields on both sides, FAG

Regular price: €2.77
WLT16-30-500
Heavy-duty spherical bearing WLT.. with integral self-aligning roller bearing, full complement design, with long-term greasing and shields on both sides, Durbal

Regular price: €138.58
RNA6905-XL
Needle roller bearing RNA69.., single row, outer ring with two ribs, without inner ring, steel cage, open design, INA

Regular price: €27.26
RNA1020
Full complement needle roller bearing RNA1.., solid and through-hardened outer ring, without inner ring (for combination with inner rings BI.., BIC.., BICG..), with lubrication hole and groove, Nadella

Regular price: €48.59
BRTF16-00-501
Heavy-duty rod end BRTF.. with integral self-aligning roller bearing, series K, female right hand thread, cage design, galvanized, with shields on both sides, relubricatable, Durbal

Regular price: €117.77
1302
Self-aligning ball bearing 13.., double row radial ball bearings, cylindrical bore, open, with steel cage, not greased, FAG

Regular price: €18.75
7302-B-XL-TVP-UO
Angular contact ball bearing 73..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG

Regular price: €31.41
Sold out
GLKS18-60-500
Heavy-duty spherical-plain bearing GLKS.. in stainless steel with solid outer ring, sliding combination steel / DURBAL-Glide (polyamid-PTFE-fibreglass-compound), series K, maintenance-free, Durbal

Regular price: €86.13
Sold out
RNAO32X42X13
Single row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, without inner ring, non-self-retaining, steel cage, open, INA

Regular price: €18.61
NNCF5004-V-C3
Double row cylindrical roller bearing, support bearing, three fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling set, IDC

Regular price: €79.31
DG22-PW
Radial spherical-plain bearing DG..-PW, sliding combination steel-brass, lined with bronze-PTFE-composite, series K, maintenance-free, Durbal

Regular price: €21.95
6004-C-C3>V
Single row deep groove ball bearing 60.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

Regular price: €2.41
6302-2RSR-C3
Single row deep groove ball bearing 63.., radial, with steel cage and contact seals on both sides, FAG

Regular price: €3.36
BEF16-20-502
Heavy-duty rod end BEF.. with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, female left hand thread, galvanized, maintenance-free, Durbal

Regular price: €38.17
RPNA25/42-XL
Adjusting needle roller bearing RPNA.., without inner ring, single row, outer ring with spherical outside surface in outer sleeve with plastic back-up rings to compensate for misalignment, INA

Regular price: €28.88