NU1009-XL-M1-C3

Bore diameter:	45
Outer diameter:	75
Width:	16
Cage:	brass cage
Bearing clearance:	C3 (slightly increased)
Material:	standard

Sold out

LRE18

Adjusting nut LRE.., spring nuts for precise adjustment, balanced radial locking, clamping system with two clamping screws on two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€170.96

Details

PAP7070-P180 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€1,906.40

7009-U-AD-G-GN-P42

Super precision angular contact ball bearing (spindle bearing), contact angle α = 25°, universal design, NTN

€119.03

PAP7050-P180 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€745.60

CLK500 32x75

Rigid shaft coupling CLK500, backlash-free, bending and torsionally stiff shaft-to-shaft connection, self-centering design, mounting without axial hub displacement, for medium to high torques, CMT Line

€45.40

Sold out

FKU75-V

Guide roller FKU.. with tapered roller bearing, without pin, convex raceway sides, with Viton seals (up to 120°C) on both sides, radius R = 400, Nadella

€276.49

Details

Sold out

KMFE11x1,5

Lockable precision lock nut KMFE.., for locking of machine components on shafts, with four slots on the circumference and integrated radial locking element, metric right-hand thread, BGL

€33.31

Details

SL045009-PP

Double row cylindrical roller bearing SL04.. with full complement roller set, locating bearing, three fixed ribs on inner ring, one fixed center rib on outer ring, sealed on both sides, INA

€95.88

Sold out

ZKLN4075-2Z-XL

Double row axial angular contact ball bearing, precision bearings for screw mounting, without fixing holes, gap seals on both sides, INA

€490.92

Details

16009-A

Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€13.97

Sold out

KBO50

Linear ball bearing KBO.. for shaft guidance systems, machined range, open design - segment cut-out, outer ring hardened and ground, high-precision guidance in plastic cage, without seals, INA

€125.09

Details

Sold out

RKUR75-NX-V

Corrosion-resistant guide roller RKUR.. with tapered roller bearing, locating roller, convex raceway side, radius R = 400, eccentric, with Viton-seals (up to 120°C), incl. lock washers and nuts, Nadella

€615.75

Details

Sold out

R073225040

Super linear bushing KBH-50-DD for high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with two integrated wiper seals, Rexroth

€207.03

Details

PAP7050-P10 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€718.24

Sold out

R067205000

Super linear bushing KBB-50 without misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, without wiper seals, Rexroth

€129.46

Details

Product information "NU1009-XL-M1-C3"