NU210-E-XL-M1A-C3

€93.50

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1099097

Manufacturer: FAG

Weight: 0.54 kg

Product information "NU210-E-XL-M1A-C3"

Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with outer ring rib-guided two-piece brass cage, FAG

Bore diameter:	50
Outer diameter:	90
Width:	20
Cage:	brass cage
Bearing clearance:	C3 (slightly increased)
Material:	standard

Similar products

NUKRE90-X-A

Stud type track roller NUKR.., solid roller pin with eccentric collar, thick-walled cylindrical outer ring, with axial guidance, full complement double-row cylindrical roller set, labyrinth seals on both sides, INA

€211.84

Sold out

GCU90-MM

Full complement single row track roller GCU.. with threaded stud, with profiled outer ring, concentric, metal shielded, incl. lock washer and nut, Nadella

€409.71

Details

Sold out

NJ308-E-XL-JP1

Single row cylindrical roller bearing NJ3.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with steel cage, FAG

€61.03

Details

KR90-PP-A-NMT

Stud type track roller KR.. without eccentric, outer ring profile optimized, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€157.97

PKR90-C

Guide roller PKR.. with tapered roller bearing, track roller, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€457.85

Sold out

GYE50-KRR-B-FA107

Radial insert ball bearing GYE.., spherical outer ring surface, grub screws in inner ring for location on shaft, compensating for misalignment, sealed on both sides, with plastic cage, relubricatable, INA

€34.77

Details

Sold out

32010-X-H

Tapered roller bearing 320.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€21.96

Details

NA3050

Full complement needle roller bearing NA3.., complete bearing, assembly of solid through-hardened outer ring RNA3.. with needle rollers set and BI3.. inner ring, with lubrication hole and groove, Nadella

€370.16

E50-XL-KLL

Radial insert ball bearing E..-KLL, cylindrical outer ring, with eccentric locking collar for mounting on shaft, triple lip seals on both sides, with plastic cage, not relubricatable, INA

€61.08

6308

Single row deep groove ball bearing 63.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€10.86

Sold out

FGL5090-EEM-SW

Full complement single row track roller FGL.. without pin, thick-walled optimized cylindrical outer ring, lubrication hole on inner ring, metal shielded, Nadella

€341.51

Details

Sold out

PKR90-C-NX-V

Corrosion-resistant guide roller PKR.. with tapered roller bearing, track roller, eccentric, with Viton-seals (up to 120°C), incl. lock washers and nuts, Nadella

€1,156.15

Details

Sold out

32913-H

Tapered roller bearing 329.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€44.73

Details

22308-E1-XL-K

Spherical roller bearing, double row, 223..-E1-K series, tapered bore, with steel cage, groove and lubrication holes on outer ring, FAG

€69.85

Sold out

R073206000

Super linear bushing KBH-60 for high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, without wiper seals, Rexroth

€271.06

Details