NU2209-E-XL-JP1-C3

Bore diameter:	45
Outer diameter:	85
Width:	23
Cage:	steel cage
Material:	standard

PAP8060-P180 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€18,988.52

30209-DY

Tapered roller bearing 302.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€20.76

PAP8080-P180 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€2,909.87

SL184912-A

Double row cylindrical roller bearing SL1849.., support bearing, three fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling set, INA

€162.97

Sold out

33110-H

Tapered roller bearing 331.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€37.38

Details

GS81112

Housing locating washer GS811.., thrust bearing washers, externally centered, made from through-hardened rolling bearing steel, raceways precision ground, bore and outside diameter precision machined, INA

€15.88

3209-BD-XL-TVH-C3

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, open design with plastic cage, FAG

€46.02

11209-TVH

Self-aligning ball bearing 112.., double row radial ball bearings, inner ring widened on both sides, cylindrical bore, groove on one side for locating in axial direction, open, with plastic cage, FAG

€59.92

2209-K-2RS-TVH-C3

Self-aligning ball bearing 22.., double row radial ball bearings, tapered bore with 1:12 taper, with plastic cage, greased, seals on both sides, FAG

€40.89

AS6085

Thrust bearing washer AS.., suitable for axial needle roller and cage assemblies AXK.., for use as a shaft or housing washer, stamped, through-hardened, polished, INA

€2.06

Sold out

QJ209-XL-N2-MPA-T42F

Four-point contact bearing QJ2.., radial ball bearings, single row, non self-retaining, solid outer ring with retaining grooves, split inner ring, with brass cage, open design, FAG

€67.81

Details

Sold out

LRE20

Adjusting nut LRE.., spring nuts for precise adjustment, balanced radial locking, clamping system with two clamping screws on two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€179.43

Details

Sold out

NUP2209-E-XL-M1-C3

Single row cylindrical roller bearing NUP2.., locating bearing, two locating ribs on outer ring, inner ring with locating rib and rib washer, cylindrical bore, open, non-greased, with two-piece roller guided brass cage, FAG

€105.24

Details

NNC4912-V

Double row cylindrical roller bearing, locating bearing, three fixed ribs on inner ring, two fixed ribs on outer ring (axial center split), full complement rolling set, IDC

€92.83

N209-E-XL-TVP2

Single row cylindrical roller bearing N2.., non-locating bearing, outer ring without ribs, inner ring with two ribs, cylindrical bore, open, non-greased, separable, with solid plastic cage, FAG

€54.38

Product information "NU2209-E-XL-JP1-C3"