NUP209-E-XL-TVP2

Bore diameter:	45
Outer diameter:	85
Width:	19
Cage:	polyamide, hard fabric
Bearing clearance:	CN (normal)
Material:	standard

11209-TVH

Self-aligning ball bearing 112.., double row radial ball bearings, inner ring widened on both sides, cylindrical bore, groove on one side for locating in axial direction, open, with plastic cage, FAG

€59.92

2209-K-2RS-TVH-C3

Self-aligning ball bearing 22.., double row radial ball bearings, tapered bore with 1:12 taper, with plastic cage, greased, seals on both sides, FAG

€40.89

AS6085

Thrust bearing washer AS.., suitable for axial needle roller and cage assemblies AXK.., for use as a shaft or housing washer, stamped, through-hardened, polished, INA

€2.06

Sold out

QJ209-XL-N2-MPA-T42F

Four-point contact bearing QJ2.., radial ball bearings, single row, non self-retaining, solid outer ring with retaining grooves, split inner ring, with brass cage, open design, FAG

€67.81

Details

Sold out

LRE20

Adjusting nut LRE.., spring nuts for precise adjustment, balanced radial locking, clamping system with two clamping screws on two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€179.43

Details

Sold out

NUP2209-E-XL-M1-C3

Single row cylindrical roller bearing NUP2.., locating bearing, two locating ribs on outer ring, inner ring with locating rib and rib washer, cylindrical bore, open, non-greased, with two-piece roller guided brass cage, FAG

€105.24

Details

NNC4912-V

Double row cylindrical roller bearing, locating bearing, three fixed ribs on inner ring, two fixed ribs on outer ring (axial center split), full complement rolling set, IDC

€92.83

N209-E-XL-TVP2

Single row cylindrical roller bearing N2.., non-locating bearing, outer ring without ribs, inner ring with two ribs, cylindrical bore, open, non-greased, separable, with solid plastic cage, FAG

€54.38

PWTR45-2RS

Yoke type track roller with profiled outer ring (contact optimized surface), with center rib and cylindrical rollers, full complement roller set, seals on both sides, IDC

€93.02

NUP2209-E-XL-TVP2

Single row cylindrical roller bearing NUP2.., locating bearing, two locating ribs on outer ring, inner ring with locating rib and rib washer, cylindrical bore, open, non-greased, with solid plastic cage, FAG

€55.24

Sold out

22209-EAK-W33-C3

Double row spherical roller bearing, series 222, tapered bore, steel cage, groove and lubrication holes on outer ring, SNR

€42.44

Details

Sold out

NJ2209-E-XL-JP1-C3

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with steel cage, FAG

€64.31

Details

7912-U-C-G-GN-P42

Super precision angular contact ball bearing (spindle bearing), contact angle α = 15°, universal design, NTN

€148.93

GYE45-KRR-B-VA-HLA

Corrosion-resistant radial insert ball bearing GYE.., spherical outer ring surface, grub screws in inner ring for location on shaft, compensating for misalignment, sealed on both sides, with plastic cage, relubricatable, INA

€123.65

CLK500 42x85

Rigid shaft coupling CLK500, backlash-free, bending and torsionally stiff shaft-to-shaft connection, self-centering design, mounting without axial hub displacement, for medium to high torques, CMT Line

€50.40

Product information "NUP209-E-XL-TVP2"