NUP304-E-XL-TVP2-C3

€30.99

Ready for dispatch within 3-5 working days: 3

Product number: 1050456

Manufacturer: FAG

EAN: 4012801588249

Weight: 0.159 kg

Product information "NUP304-E-XL-TVP2-C3"

Bore diameter:	20
Outer diameter:	52
Width:	15
Cage:	polyamide, hard fabric
Bearing clearance:	C3 (slightly increased)
Material:	standard

Similar products

NUKRE52-A

Stud type track roller NUKR.., solid roller pin with eccentric collar, thick-walled outer ring with profiled outer surface, with axial guidance, full complement double-row cylindrical roller set, labyrinth seals on both sides, INA

€94.86

Sold out

DL4416

Full complement needle bush DL.., oped design, needles retained, thin hardened calibrated outer ring made of drawn strip steel, without inner ring, Nadella

€24.18

Details

Sold out

DLF4416

Full complement needle bush DLF.., closed end design, needles retained, thin hardened calibrated outer ring made of drawn strip steel, without inner ring, Nadella

Price on request

KR52-B-NMT

Stud type track roller KR.. without eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with crowning profile R500, gap seals on both sides, incl. nut and lub. nipple, INA

€67.86

Sold out

RNA2030

Full complement needle roller bearing RNA2.., solid and through-hardened outer ring, without inner ring (for combination with inner rings BI.., BIC.., BICG..), with lubrication hole and groove, Nadella

€75.19

Details

Sold out

R065825676

Compact ball bushing KBC-40-DD-RT, ball bushing guides, standard material, POM ball retainer, reduced radial internal clearance, wiper seals integrated on both sides, without grease, Rexroth

€26.20

Details

32205-XL

Tapered roller bearing 322.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€14.85

FRLR52-EU

Floating guide roller FRLR..-EU, with double row angular contact ball bearing, light convex raceway side, eccentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella

€116.88

WS81107

Shaft locating washer WS811.., thrust bearing washers, internally centered, made from through-hardened rolling bearing steel, raceways precision ground, bore and outside diameter precision machined, INA

€8.50

Sold out

GLA52.16-ZZ

Guide wheel GLA.., with double row ball bearing, version with "gothic arch" profile, with NBR seals type RS on both sides, Nadella

€71.42

Details

3205-BD-XL-2HRS-TVH

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, with plastic cage, seals on both sides, FAG

€26.52

GCR52-EEM-SW

Full complement single row track roller GCR... with threaded stud, profiled outer ring with optimized radius, eccentric, metal shielded, incl. lock washer and nut, Nadella

€208.60

2205-TVH-C3

Self-aligning ball bearing 22.., double row radial ball bearings, cylindrical bore, open, with plastic cage, not greased, FAG

€20.03

H207

Adapter sleeve H2.., metric dimensions, for mounting roller bearings with tapered bore on cylindrical shaft seat, complete with shaft nut KM.. and lock washer MB.., BGL

€5.72

3304-BD-XL-2Z-C3

Double row angular contact ball bearing 33.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, with steel cage and sheet steel shields on both sides, FAG

€42.55