PAP2220-P180 - 25x | Cylindrical bushing Permaglide® PAP-P180

Bore diameter:	22
Outer diameter:	25
Lenght:	20
Material:	PERMAGLIDE® P180

PFV25.10-NX

Corrosion-resistant ball bearing guide roller PFV.., version with "gothic arch" profile, concentric, with NBR seals type RS on both sides, incl. lock washer and nut, Nadella

€169.36

R066801600

Segmental linear bushing KBSE-16, linear bushings, closed design with reinforced plastic housing, hardened steel segments, balls made of bearing steel, guide cage and retaining rings made of PA11, without wiper selas, without grease, Rexroth

€13.37

IR20X25X30-IS1-XL

Inner ring IR..-IS for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, with lubrication hole, INA

€16.76

LR20X25X38,5

Inner ring LR... for needle roller bearings, cylindrical, made of hardened bearing steel, raceway ground, with chamfers on the end faces, without lubrication hole, INA

€18.24

PAP2230-P10 - 5000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€8,081.78

PAP2215-P11 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€2,186.73

PAP2220-P200 - 2500x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€5,105.10

PAP2215-P180 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€3,111.23

PAP2230-P180 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€61.59

GM1725

Sprag type freewheel cage GM.. without rings, Built-In Freewheels, for installation between inner and outer ring of metric dimensions, CTS

€42.61

Sold out

KM2-E

Lock nut KM..-E, for locking of roller bearings on shafts, with four slots on the circumference for locking with lock washer MB.., metric left-hand thread, BGL

€4.38

Details

IR20X25X30-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€9.31

Sold out

RNAO17X25X13-XL

Single row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, without inner ring, non-self-retaining, steel cage, open, INA

€11.71

Details

PAP2220-P10 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€803.40

PAP2215-P11 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€1,351.84

2220DP4
PG 222520 F
PCM 222520 E
EGB2220-E40
TFZ 2220

PAP2220-P180 - 25x

Product information "PAP2220-P180 - 25x"