PAP2830-P200 - 25x

€109.91

Average lead time from new production (poss. with MOQ) in working days: 10-30

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1122774

EAN: 4028977965012

Weight: 1.065 kg

Product information "PAP2830-P200 - 25x"

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

Bore diameter:	28
Outer diameter:	32
Lenght:	30
Material:	PERMAGLIDE® P200

Alternative articles to "PAP2830-P200 - 25x"*

PM2830DX
PG 283230 A
PCM 283230 M
EGB2830-E50
POZ 2830

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

Sold out

BBE20-A-UU

Closed standard ball bushing (linear ball bearing), standard, steel cage, seals on both sides, SNR

€27.89

Details

KSO20-PP

Linear ball bearing KS.. for shaft guidance systems, heavy-duty series, open design - segment cut-out, angle-adjustable, seals on both sides, relubricatable, INA

€35.89

Sold out

FG1232-SW

Full complement single row track roller FG.. without pin, thick-walled profiled outer ring with optimized radius, lubrication hole on inner ring, without seals, Nadella

€55.79

Details

1201-TVH

Self-aligning ball bearing 12.., double row radial ball bearings, cylindrical bore, open, with plastic cage, not greased, FAG

€14.08

FRR32-EU-AS

Euroroller FRR..-EU-AS with double row angular contact ball bearing, pin with internal thread in inner ring, eccentric, with NBR seals type RS on both sides, Nadella

€85.81

Sold out

HK2520-2RS-AS1-L271

Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, single-row design, sealed on both sides, with steel cage, with lubrication hole, INA

€6.88

Details

Sold out

FRNR32

Special guide roller FRNR.. with needle roller bearing, raceway with O-ring, slighly convex raceway sides, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€214.25

Details

Sold out

R067005300

Super linear bushing KBA-20-RT with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, without wiper seals, Rexroth

€46.82

Details

Sold out

KRE32-EE

Cam follower KRE.. with pin and eccentric collar, with cage-guided needles and convex outer ring, plastic seals on both sides, with hexagon socket, incl. clamping nut, Nadella

€68.05

Details

Sold out

R063102000

Standard linear bushing KBM-O-20-D, linear bushings, open robust all-metal design, hardened and ground sleeve, with locating hole for axial and radial securing, steel guide cage, with wiper seal on one side, ungreased, Rexroth

€37.27

Details

Sold out

HN4

Hook spanner, HN series, for tightening and loosening shaft nuts on shafts, withdrawal sleeves and adapter sleeves, BGL

€22.33

Details

DSAL12-T/K

Standard rod end DSAL..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, series K, male left hand thread, zinc plated, maintenance-free, Durbal

€8.66

Sold out

R073122045

Super linear bushing KBSH-O-20-VD for very high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with complete sealing, Rexroth

€122.32

Details

6002-2ZR

Single row deep groove ball bearing 60.., radial, with steel cage and sheet steel shields on both sides, FAG

€2.36

Sold out

BRTM16-60-501

Heavy-duty rod end BRTM.. in stainless steel, with integral self-aligning roller bearing, series K, male right hand thread, cage design, with shields on both sides, relubricatable, Durbal

€186.77

Details