PAP6040-P200 - 1000x | Cylindrical bushing Permaglide® PAP-P200

Bore diameter:	60
Outer diameter:	65
Lenght:	40
Material:	PERMAGLIDE® P200

H2309

Adapter sleeve H2.., metric dimensions, for mounting roller bearings with tapered bore on cylindrical shaft seat, complete with shaft nut KM.. and lock washer MB.., BGL

€7.85

PAP6060-P180 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€522.79

CLK134 35x65

High-quality internal clamping set CLK134, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting without axial hub displacement, for medium to high torques, CMT Line

€18.96

PAP6060-P180 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€4,963.73

AX54565

Axial needle roller bearing AX.., thick series, single-row axial needle roller cage with built-in thick washer, Nadella

€33.61

Sold out

LF15

Adjusting nut LF.., spring nuts for precise adjustment, axial locking, standard clamping system with two clamping screws on one spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€122.59

Details

61810-Y-C3

Single row deep groove ball bearing 618.., radial contact, with brass cage, open and not greased, FAG

€24.88

Sold out

RKUR65-NX

Corrosion-resistant guide roller RKUR.. with tapered roller bearing, locating roller, convex raceway side, radius R = 400, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€446.61

Details

PAP6060-P180 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€295.71

CLK200 38x65

High-quality internal clamping set CLK200, backlash-free shaft-hub connection, non-self-centering design: radial standard height - axial short width, mounting without axial hub displacement, for medium to high torques, CMT Line

€19.46

PAP6070-P200 - 25x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€703.40

Sold out

CLK134 38x65

High-quality internal clamping set CLK134, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting without axial hub displacement, for medium to high torques, CMT Line

€18.96

Details

KM9

Lock nut KM.., for locking of roller bearings on shafts, with four slots on the circumference for locking with lock washer MB.., metric right-hand thread, BGL

€2.95

PAP6030-P180 - 5x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€49.45

PAP6040-P180 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€3,883.52

PM6040DX
PG 606540 A
PCM 606540 M
EGB6040-E50
POZ 6040

PAP6040-P200 - 1000x

Product information "PAP6040-P200 - 1000x"