PAP6070-P180 - 25x | Cylindrical bushing Permaglide® PAP-P180

Bore diameter:	60
Outer diameter:	65
Lenght:	70
Material:	PERMAGLIDE® P180

Sold out

AM30/65

Precision locknut AM, for preloading bearings for screw drives, axially clampable with four segments, INA

€169.09

PAP6060-P180 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€4,963.73

Sold out

RNA1040

Full complement needle roller bearing RNA1.., solid and through-hardened outer ring, without inner ring (for combination with inner rings BI.., BIC.., BICG..), with lubrication hole and groove, Nadella

€78.66

Details

RKU65-V

Guide roller RKU.. with tapered roller bearing, locating roller, convex raceway side, radius R = 400, concentric, with Viton-seals (up to 120°C), incl. lock washers and nuts, Nadella

€238.22

Sold out

LFE15

Adjusting nut LFE.., spring nuts for precise adjustment, balanced axial locking, clamping system with two clamping screws on each of two spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€212.11

Details

PAP6070-P200 - 25x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€703.40

Sold out

RKULR65

Floating guide roller RKULR.. with tapered roller bearing, convex raceway side, radius R = 400, eccentric,, sealed on both sides, incl. lock washers and nuts, Nadella

€291.43

Details

PAP6060-P180 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€295.71

CLK110 50x65

High-quality internal clamping set CLK110, backlash-free shaft-hub connection, self-centering design: radially flat - axially long, mounting without axial hub displacement, for medium to high torques, CMT Line

€49.40

PAP6030-P180 - 5x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€49.45

CLK134 40x65

High-quality internal clamping set CLK134, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting without axial hub displacement, for medium to high torques, CMT Line

€18.96

KMT8

Precision shaft nut KMT.., for locking of machine components on shafts, with three radial locking pins, metric right-hand thread, BGL

€30.73

AM35

Precision locknut AM, for preloading bearings for screw drives, axially clampable with four segments, INA

€105.05

PAP6040-P180 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€3,883.52

Sold out

RNA2040

Full complement needle roller bearing RNA2.., solid and through-hardened outer ring, without inner ring (for combination with inner rings BI.., BIC.., BICG..), with lubrication hole and groove, Nadella

€104.10

Details

6070DP4
PG 606570 F
PCM 606570 E
EGB6070-E40
TFZ 6070

PAP6070-P180 - 25x

Product information "PAP6070-P180 - 25x"