PAP7050-P200 - 2500x

€32,433.86

Average lead time from new production (poss. with MOQ) in working days: 10-30

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1122772

EAN: 4028977964992

Weight: 540 kg

Product information "PAP7050-P200 - 2500x"

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

Bore diameter:	70
Outer diameter:	75
Lenght:	50
Material:	PERMAGLIDE® P200

Alternative articles to "PAP7050-P200 - 2500x"*

PM7050DX
PG 707550 A
PCM 707550 M
EGB7050-E50
POZ 7050

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

Sold out

33009-H

Tapered roller bearing 330.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€39.21

Details

KBS50-PP-AS

Linear ball bearing KBS.. for shaft guidance systems, machined range, slotted design, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, relubricatable, INA

€108.75

Sold out

R067115040

Super linear bushing KBA-O-50-D with misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with wiper seal on one side, Rexroth

€143.10

Details

Sold out

R073005000

Super linear bushing KBSH-50 for very high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, without wiper seals, Rexroth

€328.26

Details

PAP7050-P10 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€33,123.68

Sold out

R150256066

Single nut with flange, FEM-E-C 50X16RX6-6, Ball screw assemblies, sealed, Rexroth

€952.55

Details

PAP7040-P200 - 2500x

€36,653.18

Sold out

DGE30-AW

Axial spherical-plain bearing DGE..-AW, sliding combination steel-steel, bonded with PTFE-fabric, hard chrome-plated inner ring running surface, maintenance-free, Durbal

Price on request

PAP7040-P20 - 2500x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P20 with steel backing, for grease or liquid-lubricated applications: contains lead, with oil distributing pockets, ready to install, lifetime lubrication possible, low wear, low sensitivity to edge loading, good damping characteristics, insensitive to impact loads, good chemical resistance, KS Permaglide®

€26,749.13

KB50-PP

Linear ball bearing KB.. for shaft guidance systems, machined range, closed design, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, INA

€84.06

PAP7040-P180 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€367.80

CLK400 42x75

High-quality internal clamping set CLK400, backlash-free shaft-hub connection, self-centering design: radial standard height - axially long, mounting without axial hub displacement, for very high torques, CMT Line

€76.60

Sold out

AXNBT2575

Combined precision roller bearing AXNBT.., radial bearing part: needle roller bearing with cage, lateral:a xial needle roller bearings with thrust washers, adjustable axial preload, with bolt-on holes, Nadella

Price on request

H211

Adapter sleeve H2.., metric dimensions, for mounting roller bearings with tapered bore on cylindrical shaft seat, complete with shaft nut KM.. and lock washer MB.., BGL

€7.41

Sold out

NN3009-D-K-TVP-SP-XL

High precision cylindrical roller bearing, series NN30.., non-locating bearing, double row, tapered bore, with plastic cage, FAG

€226.44

Details