Skip to main content Skip to search Skip to main navigation

PAP7540-P10 - 100x

Product information "PAP7540-P10 - 100x"

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®
Bore diameter: 75
Outer diameter: 80
Lenght: 40
Material: PERMAGLIDE® P10
Alternative articles to "PAP7540-P10 - 100x"*
7540DU
* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.
Skip product gallery

Similar products

Sold out
ZM60
Precision locknut ZM, light series, for preloading bearings for screw drives, radially clampable with locking pins, INA

Regular price: €169.09
Sold out
NUTR40
Yoke type track roller with profiled outer ring (contact optimized surface), inner ring and flange rings, full complement roller set, labyrinth seals on both sides, IDC

Regular price: €66.40
Sold out
GRAE40-NPP-B-FA106
Radial insert ball bearing GRAE.., noise-tested, spherical outside surface of the outer ring, with eccentric locking collar for mounting on shaft, compensating for misalignment, sealed on both sides, with plastic cage, relubricatable, INA

Regular price: €34.65
Sold out
IR70X80X25-EGS
Inner ring IR..-EGS for needle roller bearings, cylindrical, made of hardened rolling bearing steel, surface ground without twist, without lubrication hole, INA

Regular price: €29.19
Sold out
6208-HT200-ZZ
Single row deep groove ball bearing, sheet steel cage, shields on both sides, temperature up to +200°C, SNR - Topline

Regular price: €52.82
Sold out
ES208-G2
Bearing insert ES2.. for bearing units, spherical outer ring, fixing by eccentric locking collar, shielded on both sides, SNR

Regular price: €17.98
Sold out
KRVE80-PP-A-NMT
Stud type track roller KRVE.. with eccentric, outer ring profile optimized, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

Regular price: €156.77
CSK40-P - UKC40-ZZ
Sprag type freewheel UKC.., ball bearing freewheels, self-centering, one keyway on the inner ring, shielded on both sides, operating temperature -10°C to +60°C, CTS

Regular price: €96.24
Sold out
FG4080-SW
Full complement single row track roller FG.. without pin, thick-walled profiled outer ring with optimized radius, lubrication hole on inner ring, without seals, Nadella

Regular price: €204.88
Sold out
6208-M
Single row deep groove ball bearing 62.., radial ball bearings, cylindrical bore, with solid brass cage, open and not greased, FAG

Price on request
Sold out
GCL80-EE-SW
Full complement single row track roller GCL.. with threaded stud, with optimized cylindrical outer ring, concentric, with plastic seals, incl. lock washer and nut, Nadella

Price on request
Sold out
DIST-FS62
Spacer ring DIST.. for FS/FSH/FSR/FSX guide rails, for mounting between guide rail and mounting surface, anodized aluminium version, without screw, Nadella

Price on request
Sold out
NA3040
Full complement needle roller bearing NA3.., complete bearing, assembly of solid through-hardened outer ring RNA3.. with needle rollers set and BI3.. inner ring, with lubrication hole and groove, Nadella

Regular price: €300.74
Sold out
GCU80
Full complement single row track roller GCU.. with threaded stud, with profiled outer ring, concentric, without seals, incl. lock washer and nut, Nadella

Regular price: €336.26
Sold out
FGU4080-MM
Full complement single row track roller FGU.. without pin, light series, with optimized profiled outer ring, non-separable, metal shielded, Nadella

Regular price: €341.24