PAP7580-P200 - 25x

€1,525.05

Average lead time from new production (poss. with MOQ) in working days: 10-30

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1124769

Weight: 9.25 kg

Product information "PAP7580-P200 - 25x"

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

Bore diameter:	75
Outer diameter:	80
Lenght:	80
Material:	PERMAGLIDE® P200

Alternative articles to "PAP7580-P200 - 25x"*

PM7580DX
PG 758080 A
PCM 758080 M
EGB7580-E50
POZ 7580

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

DGIHO-K 30 DO

Hydraulic rod end DGIHO-K..-DO, housing made of forged heat-treated steel, with pressed spherical-plain bearing DGE..-ES, with slot and clambing arrangement, sliding pair steel-steel, female right hand thread, relubricatable, Durbal

Price on request

Sold out

DGE50-SW

Angular contact spherical-plain bearing DGE..-SW, sliding combination steel-steel, bonded with PTFE-fabric, hard chrome-plated inner ring running surface, maintenance-free, Durbal

Price on request

DGE50-SX

Angular contact spherical-plain bearing DGE..-SX, sliding combination steel-steel, phosphated, relubricatable, Durbal

Price on request

Sold out

LF19

Adjusting nut LF.., spring nuts for precise adjustment, axial locking, standard clamping system with two clamping screws on one spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€139.55

Details

Sold out

LFE19

Adjusting nut LFE.., spring nuts for precise adjustment, balanced axial locking, clamping system with two clamping screws on each of two spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€238.65

Details

LR19

Adjusting nut LR.., spring nuts for precise adjustment, radial locking, standard clamping system with a clamping screw on spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€117.16

Sold out

LRE19

Adjusting nut LRE.., spring nuts for precise adjustment, balanced radial locking, clamping system with two clamping screws on two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€175.27

Details

KR80-PP

Track roller with solid roller stud, with cage-guided needles and profiled outer ring (contact optimized surface), with hexagon socket, seals on both sides, IDC

€103.97

KR80-X-PP

Track roller with solid roller stud, with cage-guided needles and cylindrical outer ring, with hexagon socket, seals on both sides, IDC

€114.34

KRE80-PP

Eccentric track roller with solid roller stud, with cage-guided needles and profiled outer ring (contact optimized surface), with hexagon socket, seals on both sides, IDC

€121.45

KRV80-PP

Full complement stud type track roller, profiled outer ring (contact optimized surface), with hexagon socket, seals on both sides, IDC

€103.97

KRV80-X-PP

Full complement stud type track roller, cylindrical outer ring, with hexagon socket, seals on both sides, IDC

€114.34

KRVE80-PP

Eccentric full complement stud type track roller, profiled outer ring (contact optimized surface), with hexagon socket, seals on both sides, IDC

€122.46

NA4911

Needle roller bearing of series NA49.., single row, outer ring with two ribs, inner ring without ribs (removable), steel cage, IDC

€39.89

NA6911

Needle roller bearing of series NA69.., double row, outer ring with three ribs, inner ring without ribs (removable), steel cage, IDC

€78.01