PAP9560-P10 - 5x

€202.33

Average lead time from new production (poss. with MOQ) in working days: 10-30

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1124893

Weight: 1.78 kg

Product information "PAP9560-P10 - 5x"

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

Bore diameter:	95
Outer diameter:	100
Lenght:	60
Material:	PERMAGLIDE® P10

Alternative articles to "PAP9560-P10 - 5x"*

9560DU

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

GS81213

Housing locating washer GS812.., thrust bearing washers, externally centered, made from through-hardened rolling bearing steel, raceways precision ground, bore and outside diameter precision machined, INA

€32.84

Sold out

ZKLF40100-2Z-XL

Double row axial angular contact ball bearing, precision bearings for screw mounting, with fixing holes, gap seals on both sides, INA

€611.81

Details

Sold out

22211-EA-K-B33-C3

Spherical roller bearing, double row, tapered bore, groove and lubrication holes on outer ring, main dimensions to DIN 635-2, NRB

€31.93

Details

Sold out

GYE50-211-KRR-B

Radial insert ball bearing GYE.., spherical outer ring surface, grub screws in inner ring for location on shaft, compensating for misalignment, sealed on both sides, with plastic cage, relubricatable, INA

€76.43

Details

NCF2211-V

Single row cylindrical roller bearing, support bearing, two fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling element, IDC

€123.91

QJ211-XL-MPA

Four-point contact bearing QJ2.., radial ball bearings, single row, non self-retaining, solid outer ring without retaining grooves, split inner ring, with brass cage, open design, FAG

€78.42

6211-C-C3

Single row deep groove ball bearing 62.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€12.13

4309-B-TVH

Double row deep groove ball bearing 43.., radial, with solid cage made of polyamide, open, FAG

€117.63

AL30 - GL30-FP

Roller type freewheel GL..-FP (basic unit to be mounted with covers), two ball bearings of series 160.. supported, one keyway on the inner ring, bolt holes on outer ring, incl. flat seals, CTS

€267.42

Sold out

NU2211-E-XL-M1A-C3

Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with outer ring rib-guided two-piece brass cage, FAG

€151.79

Details

2211-K-TVH-C3

Self-aligning ball bearing 22.., double row radial ball bearings, tapered bore with 1:12 taper, open, with plastic cage, not greased, FAG

€46.60

Sold out

IR85X100X63-EGS

Inner ring IR..-EGS for needle roller bearings, cylindrical, made of hardened rolling bearing steel, surface ground without twist, without lubrication hole, INA

€72.86

Details

Sold out

SL014914-A-C3

Double row cylindrical roller bearing SL0149.. with full complement rolling set, locating bearing, three fixed ribs on inner ring, two fixed ribs on outer ring (axial center split), INA

€128.86

Details

PAP9560-P10 - 1x

€40.77

Sold out

22211-EA-W33

Double row spherical roller bearing, series 222, cylindrical bore, steel cage, groove and lubrication holes on outer ring, SNR

€48.19

Details