Skip to main content Skip to search Skip to main navigation

PAW28-P10 - 30x

Product information "PAW28-P10 - 30x"

Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®
Bore diameter: 28
Outer diameter: 48
Height: 1,5
Material: PERMAGLIDE® P10
Skip product gallery

Similar products

R151234013
Single nut with flange, FEM-E-S 32X10RX3,969-5, Ball screw assemblies, sealed, Rexroth

Regular price: €355.06
Sold out
LF9
Adjusting nut LF.., spring nuts for precise adjustment, axial locking, standard clamping system with two clamping screws on one spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

Regular price: €94.80
Sold out
DLF4020
Full complement needle bush DLF.., closed end design, needles retained, thin hardened calibrated outer ring made of drawn strip steel, without inner ring, Nadella

Regular price: €32.20
IR40X48X22-XL
Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

Regular price: €9.31
PAW28-P10 - 500x
Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

Regular price: €898.95
PAW28-P14 - 2500x
Thrust washer PAW.., maintenance-free plain bearing, standard material P14 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, little wear, low friction value, no tendency to fuse with metal, KS Permaglide®

Regular price: €4,043.33
PAW28-P200 - 10x
Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

Regular price: €48.24
PAW28-P200 - 1x
Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

Price on request
Sold out
R155231003
Single nut with flange, FEM-E-S 35X5LX3,5-4, Ball screw assemblies, sealed, Rexroth

Price on request
Sold out
LFE9
Adjusting nut LFE.., spring nuts for precise adjustment, balanced axial locking, clamping system with two clamping screws on each of two spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

Regular price: €164.98
Sold out
ET4048
Radial seal ring, ET.. series, for sealing needle roller bearings, made of sheet steel-reinforced elastomer, Nadella

Price on request
IR40X48X40-XL
Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

Regular price: €16.71
PAW28-P10 - 100x
Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

Regular price: €216.00
PAW28-P14 - 500x
Thrust washer PAW.., maintenance-free plain bearing, standard material P14 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, little wear, low friction value, no tendency to fuse with metal, KS Permaglide®

Regular price: €892.03
PAW28-P200 - 2500x
Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

Regular price: €7,974.53