PAW38-P200 - 5000x

€19,501.95

Average lead time from new production (poss. with MOQ) in working days: 10-30

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1123071

Manufacturer: Permaglide

EAN: 4028977967191

Weight: 105 kg

Product information "PAW38-P200 - 5000x"

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

Bore diameter:	38
Outer diameter:	62
Height:	1,5
Material:	PERMAGLIDE® P200

Similar products

Sold out

DGE25-AW

Axial spherical-plain bearing DGE..-AW, sliding combination steel-steel, bonded with PTFE-fabric, hard chrome-plated inner ring running surface, maintenance-free, Durbal

Price on request

PWTR30-2RS-XL

Yoke type track roller PWTR.., with profiled outer ring (contact optimized surface), with center rib and full complement double-row cylindrical roller set, with axial guidance, full complement roller set, protected lip seals on both sides, INA

€64.96

7206-B-XL-JP-UA

Angular contact ball bearing 72..-B-JP, single-row, contact angle α = 40°, with sheet steel cage, open - without seals, not greased, FAG

€31.83

Sold out

R065815030

Compact ball bushing KBC-50-D-NR, ball bushing guides, stainless material, POM ball retainer, normal radial internal clearance, wiper seal on one side, without grease, Rexroth

€74.38

Details

Sold out

RKXR62-C-NX

Corrosion-resistant guide roller RKXR.. with tapered roller bearing, with threaded stud, convex raceway side, radius R = 400, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€555.00

Details

NJ2305-E-XL-M1-C3

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with two-piece roller guided brass cage, FAG

€82.16

KB40-PP

Linear ball bearing KB.. for shaft guidance systems, machined range, closed design, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, INA

€61.75

3206-BD-XL-2HRS-TVH-C3

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, with plastic cage, seals on both sides, FAG

€31.64

PNA40/62-XL

Adjusting needle roller bearing PNA.., with inner ring, single row, outer ring with spherical outside surface in outer sleeve with plastic back-up rings to compensate for misalignment, INA

€53.28

PAW38-P200 - 2500x

€10,052.25

6305-2Z-C3

Single row deep groove ball bearing 63.., radial, with steel cage and sheet steel shields on both sides, FAG

€5.12

RAE30-XL-NPP-NR

Radial insert ball bearing RAE.., cylindrical outer ring, with eccentric locking collar for mounting on shaft, sealed on both sides, with plastic cage, not relubricatable, INA

€20.41

Sold out

GCRL62-EEM-SW

Full complement single row track roller GCRL.. with threaded stud, with optimized cylindrical outer ring, eccentric, metal shielded, incl. lock washer and nut, Nadella

Price on request

Sold out

QJ206-XL-N2-MPA-T42B

Four-point contact bearing QJ2.., radial ball bearings, single row, non self-retaining, solid outer ring with retaining grooves, split inner ring, with brass cage, open design, FAG

€51.46

Details

NA4908

Needle roller bearing of series NA49.., single row, outer ring with two ribs, inner ring without ribs (removable), steel cage, IDC

€27.31