INFO@CMT.GMBH
+49-2332-5510500
NO MINIMUM ORDER VALUE
WORLDWIDE SHIPPING
Go to homepage
Wishlist
Shopping cart €0.00

Linear Rolling Guidance Systems

Rolling Bearings

Rod Ends, Spherical Plain Bearings

Freewheels, Backstops

Bearing Housings

Bearing Units

Locknuts, Sleeves

Shaft Couplings

Locking Assemblies

Drive Chains, Conveyor Chains

Drive Belts, Conveyor Belts

Special Parts

Filter products

1600-S8M-30
1600-S8M-30
Width: 30 | Height: 5,3 | Tooth height: 3,05 | Pitch: 8 | No. of teeth: 200 | Material: neoprene
Timing belt, profile S8M STD/STS - flat-top semi-circular tooth shape, 8mm pitch, made endless from neoprene with premium fibreglass tension member and high-strengthtooth protection fabric, black, cut to width 30mm, Linmax Orange

€33.26
1600-S8M-450
1600-S8M-450
Width: 450 | Height: 5,3 | Tooth height: 3,05 | Pitch: 8 | No. of teeth: 200 | Material: neoprene
Timing belt, profile S8M STD/STS - flat-top semi-circular tooth shape, 8mm pitch, made endless from neoprene with premium fibreglass tension member and high-strength nylon tooth protection fabric, black, full sleeve, Linmax Orange

€377.49
1600-S8M-50
1600-S8M-50
Width: 50 | Height: 5,3 | Tooth height: 3,05 | Pitch: 8 | No. of teeth: 200 | Material: neoprene
Timing belt, profile S8M STD/STS - flat-top semi-circular tooth shape, 8mm pitch, made endless from neoprene with premium fibreglass tension member and high-strengthtooth protection fabric, black, cut to width 50mm, Linmax Orange

€55.89
1600-S8M-85
1600-S8M-85
Width: 85 | Height: 5,3 | Tooth height: 3,05 | Pitch: 8 | No. of teeth: 200 | Material: neoprene
Timing belt, profile S8M STD/STS - flat-top semi-circular tooth shape, 8mm pitch, made endless from neoprene with premium fibreglass tension member and high-strengthtooth protection fabric, black, cut to width 85mm, Linmax Orange

€94.65
1600-XXH-200
1600-XXH-200
Design: XXH | Width: 50,8 | Height: 15,7 | Tooth height: 9,53 | Pitch: 31,75 | No. of teeth: 128 | Material: neoprene
Inch sizes timing belt, XXH profile - trapezoidal toothing with 31.75mm pitch, endless made of neoprene with premium fibreglass tension member, black, cut to width 50.8mm, Linmax Orange

€345.80
1600-XXH-300
1600-XXH-300
Design: XXH | Width: 76,2 | Height: 15,7 | Tooth height: 9,53 | Pitch: 31,75 | No. of teeth: 128 | Material: neoprene
Inch sizes timing belt, XXH profile - trapezoidal toothing with 31.75mm pitch, endless made of neoprene with premium fibreglass tension member, black, cut to width 76.2mm, Linmax Orange

€531.39
1600-XXH-400
1600-XXH-400
Design: XXH | Width: 101,6 | Height: 15,7 | Tooth height: 9,53 | Pitch: 31,75 | No. of teeth: 128 | Material: neoprene
Inch sizes timing belt, XXH profile - trapezoidal toothing with 31.75mm pitch, endless made of neoprene with premium fibreglass tension member, black, cut to width 101.6mm, Linmax Orange

€691.00
1600-XXH-430
1600-XXH-430
Design: XXH | Width: 430 | Height: 15,7 | Tooth height: 9,53 | Pitch: 31,75 | No. of teeth: 128 | Material: neoprene
Inch sizes timing belt, XXH profile - trapezoidal toothing with 31.75mm pitch, endless made of neoprene with premium fibreglass tension member, black, full sleeve, Linmax Orange

€2,542.57
1600-XXH-500
1600-XXH-500
Design: XXH | Width: 127 | Height: 15,7 | Tooth height: 9,53 | Pitch: 31,75 | No. of teeth: 128 | Material: neoprene
Inch sizes timing belt, XXH profile - trapezoidal toothing with 31.75mm pitch, endless made of neoprene with premium fibreglass tension member, black, cut to width 127mm, Linmax Orange

€875.99
16002-A
16002-A
Bore diameter: 15 | Outer diameter: 32 | Width: 8 | Cage: steel cage | Bearing clearance: CN (normal) | Material: standard
Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€5.60
16002-A-2Z
16002-A-2Z
Bore diameter: 15 | Outer diameter: 32 | Width: 8 | Sealing: cover shields on both sides | Cage: steel cage | Bearing clearance: CN (normal) | Material: standard
Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, with steel cage and sheet steel shields on both sides, FAG

€6.45
16002-A-C3
16002-A-C3
Bore diameter: 15 | Outer diameter: 32 | Width: 8 | Cage: steel cage | Bearing clearance: C3 (slightly increased) | Material: standard
Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€5.60
16003-A
16003-A
Bore diameter: 17 | Outer diameter: 35 | Width: 8 | Cage: steel cage | Bearing clearance: CN (normal) | Material: standard
Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€5.65
16003-A-2Z
16003-A-2Z
Bore diameter: 17 | Outer diameter: 35 | Width: 8 | Sealing: cover shields on both sides | Cage: steel cage | Bearing clearance: CN (normal) | Material: standard
Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, with steel cage and sheet steel shields on both sides, FAG

€6.51
16003-A-C3
16003-A-C3
Bore diameter: 17 | Outer diameter: 35 | Width: 8 | Cage: steel cage | Bearing clearance: C3 (slightly increased) | Material: standard
Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€5.65
16004-A
16004-A
Bore diameter: 20 | Outer diameter: 42 | Width: 8 | Cage: steel cage | Bearing clearance: CN (normal) | Material: standard
Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€6.23
16004-A-2Z
16004-A-2Z
Bore diameter: 20 | Outer diameter: 42 | Width: 8 | Sealing: cover shields on both sides | Cage: steel cage | Bearing clearance: CN (normal) | Material: standard
Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, with steel cage and sheet steel shields on both sides, FAG

€7.13
16004-A-C3
16004-A-C3
Bore diameter: 20 | Outer diameter: 42 | Width: 8 | Cage: steel cage | Bearing clearance: C3 (slightly increased) | Material: standard
Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€6.23
16005-A
16005-A
Bore diameter: 25 | Outer diameter: 47 | Width: 8 | Cage: steel cage | Bearing clearance: CN (normal) | Material: standard
Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€6.89
16005-A-2Z
16005-A-2Z
Bore diameter: 25 | Outer diameter: 47 | Width: 8 | Sealing: cover shields on both sides | Cage: steel cage | Bearing clearance: CN (normal) | Material: standard
Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, with steel cage and sheet steel shields on both sides, FAG

€7.92
16005-A-C3
16005-A-C3
Bore diameter: 25 | Outer diameter: 47 | Width: 8 | Cage: steel cage | Bearing clearance: C3 (slightly increased) | Material: standard
Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€6.89
16006-A
16006-A
Bore diameter: 30 | Outer diameter: 55 | Width: 13 | Cage: steel cage | Bearing clearance: CN (normal) | Material: standard
Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€8.06
16006-A-2Z
16006-A-2Z
Bore diameter: 30 | Outer diameter: 55 | Width: 13 | Sealing: cover shields on both sides | Cage: steel cage | Bearing clearance: CN (normal) | Material: standard
Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, with steel cage and sheet steel shields on both sides, FAG

€9.29
16006-A-C3
16006-A-C3
Bore diameter: 30 | Outer diameter: 55 | Width: 13 | Cage: steel cage | Bearing clearance: C3 (slightly increased) | Material: standard
Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€8.07
This website uses cookies to ensure the best experience possible. More information...