Bore diameter:
30
|
Outer diameter:
55
|
Width:
19
|
Sealing:
seals on both sides
|
Cage:
polyamide, hard fabric
|
Bearing clearance:
CN (normal)
|
Material:
standard
Double row angular contact ball bearing 30.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, seals on both sides, INA
Bore diameter:
30
|
Outer diameter:
55
|
Width:
19
|
Sealing:
seals on both sides
|
Cage:
polyamide, hard fabric
|
Bearing clearance:
C3 (slightly increased)
|
Material:
standard
Double row angular contact ball bearing 30.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, seals on both sides, INA
Bore diameter:
30
|
Outer diameter:
55
|
Width:
19
|
Sealing:
cover shields on both sides
|
Cage:
polyamide, hard fabric
|
Bearing clearance:
CN (normal)
|
Material:
standard
Double row angular contact ball bearing 30.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, steel shields on both sides, INA
Bore diameter:
35
|
Outer diameter:
62
|
Width:
20
|
Sealing:
seals on both sides
|
Cage:
polyamide, hard fabric
|
Bearing clearance:
CN (normal)
|
Material:
standard
Double row angular contact ball bearing 30.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, seals on both sides, INA
Bore diameter:
35
|
Outer diameter:
62
|
Width:
20
|
Sealing:
cover shields on both sides
|
Cage:
polyamide, hard fabric
|
Bearing clearance:
CN (normal)
|
Material:
standard
Double row angular contact ball bearing 30.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, steel shields on both sides, INA
Bore diameter:
40
|
Outer diameter:
68
|
Width:
21
|
Sealing:
seals on both sides
|
Cage:
polyamide, hard fabric
|
Bearing clearance:
CN (normal)
|
Material:
standard
Double row angular contact ball bearing 30.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, seals on both sides, INA
Bore diameter:
40
|
Outer diameter:
68
|
Width:
21
|
Sealing:
cover shields on both sides
|
Cage:
polyamide, hard fabric
|
Bearing clearance:
CN (normal)
|
Material:
standard
Double row angular contact ball bearing 30.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, steel shields on both sides, INA
Inch sizes timing belt, MXL profile - trapezoidal toothing with 2.032mm pitch, endless made of neoprene with premium fibreglass tension member, black, cut to width 3.175mm, Linmax Orange
Inch sizes timing belt, MXL profile - trapezoidal toothing with 2.032mm pitch, endless made of neoprene with premium fibreglass tension member, black, cut to width 4.763mm, Linmax Orange
Inch sizes timing belt, MXL profile - trapezoidal toothing with 2.032mm pitch, endless made of neoprene with premium fibreglass tension member, black, cut to width 6.35mm, Linmax Orange
Inch sizes timing belt, MXL profile - trapezoidal toothing with 2.032mm pitch, endless made of neoprene with premium fibreglass tension member, black, full sleeve, Linmax Orange
Tapered roller bearing 302.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG
Tapered roller bearing 302.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG
