INFO@CMT.GMBH
+49-2332-5510500
NO MINIMUM ORDER VALUE
WORLDWIDE SHIPPING
Go to homepage
Wishlist
Shopping cart €0.00

Linear Rolling Guidance Systems

Rolling Bearings

Rod Ends, Spherical Plain Bearings

Freewheels, Backstops

Bearing Housings

Bearing Units

Locknuts, Sleeves

Shaft Couplings

Locking Assemblies

Drive Chains, Conveyor Chains

Drive Belts, Conveyor Belts

Special Parts

Filter products

51152-MP
51152-MP
Bore diameter: 260 | Outer diameter: 320 | Height: 45 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 511..-MP, single direction, flat housing locating washer (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

€774.75
51156-MP
51156-MP
Bore diameter: 280 | Outer diameter: 350 | Height: 53 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 511..-MP, single direction, flat housing locating washer (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

€994.10
51160-MP
51160-MP
Bore diameter: 300 | Outer diameter: 380 | Height: 62 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 511..-MP, single direction, flat housing locating washer (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

€1,293.45
51164-MP
51164-MP
Bore diameter: 320 | Outer diameter: 400 | Height: 63 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 511..-MP, single direction, flat housing locating washer (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

€1,747.20
51168-MP
51168-MP
Bore diameter: 340 | Outer diameter: 420 | Height: 64 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 511..-MP, single direction, flat housing locating washer (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

€2,199.06
51172-MP
51172-MP
Bore diameter: 360 | Outer diameter: 440 | Height: 65 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 511..-MP, single direction, flat housing locating washer (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

€2,746.00
51176-MP
51176-MP
Bore diameter: 380 | Outer diameter: 460 | Height: 65 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 511..-MP, single direction, flat housing locating washer (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

€3,019.93
51180-MP
51180-MP
Bore diameter: 400 | Outer diameter: 480 | Height: 65 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 511..-MP, single direction, flat housing locating washer (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

€3,321.18
Sold out
51184-MP
51184-MP
Bore diameter: 420 | Outer diameter: 500 | Height: 65 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 511..-MP, single direction, flat housing locating washer (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

€4,152.41
Details
51188-MP
51188-MP
Bore diameter: 440 | Outer diameter: 540 | Height: 80 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 511..-MP, single direction, flat housing locating washer (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

€4,691.82
Sold out
51192-MP
51192-MP
Bore diameter: 460 | Outer diameter: 560 | Height: 80 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 511..-MP, single direction, flat housing locating washer (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

€5,269.82
Details
Sold out
51196-MP
51196-MP
Bore diameter: 480 | Outer diameter: 580 | Height: 80 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 511..-MP, single direction, flat housing locating washer (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

€5,717.93
Details
512-8M-20
512-8M-20
Design: HTD-8M | Width: 20 | Height: 6 | Tooth height: 3,38 | Pitch: 8 | No. of teeth: 64 | Material: neoprene
Toothed belt, HTD-8M profile - semi-circular tooth shape with 8mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 20mm, Linmax Orange

€7.08
512-8M-30
512-8M-30
Design: HTD-8M | Width: 30 | Height: 6 | Tooth height: 3,38 | Pitch: 8 | No. of teeth: 64 | Material: neoprene
Toothed belt, HTD-8M profile - semi-circular tooth shape with 8mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 30mm, Linmax Orange

€10.56
512-8M-50
512-8M-50
Design: HTD-8M | Width: 50 | Height: 6 | Tooth height: 3,38 | Pitch: 8 | No. of teeth: 64 | Material: neoprene
Toothed belt, HTD-8M profile - semi-circular tooth shape with 8mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 50mm, Linmax Orange

€17.75
512-8M-85
512-8M-85
Design: HTD-8M | Width: 85 | Height: 6 | Tooth height: 3,38 | Pitch: 8 | No. of teeth: 64 | Material: neoprene
Toothed belt, HTD-8M profile - semi-circular tooth shape with 8mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 85mm, Linmax Orange

€30.05
512-S8M-20
512-S8M-20
Width: 20 | Height: 5,3 | Tooth height: 3,05 | Pitch: 8 | No. of teeth: 64 | Material: neoprene
Timing belt, profile S8M STD/STS - flat-top semi-circular tooth shape, 8mm pitch, made endless from neoprene with premium fibreglass tension member and high-strengthtooth protection fabric, black, cut to width 20mm, Linmax Orange

€9.87
512-S8M-30
512-S8M-30
Width: 30 | Height: 5,3 | Tooth height: 3,05 | Pitch: 8 | No. of teeth: 64 | Material: neoprene
Timing belt, profile S8M STD/STS - flat-top semi-circular tooth shape, 8mm pitch, made endless from neoprene with premium fibreglass tension member and high-strengthtooth protection fabric, black, cut to width 30mm, Linmax Orange

€14.79
512-S8M-450
512-S8M-450
Width: 450 | Height: 5,3 | Tooth height: 3,05 | Pitch: 8 | No. of teeth: 64 | Material: neoprene
Timing belt, profile S8M STD/STS - flat-top semi-circular tooth shape, 8mm pitch, made endless from neoprene with premium fibreglass tension member and high-strength nylon tooth protection fabric, black, full sleeve, Linmax Orange

€134.52
512-S8M-50
512-S8M-50
Width: 50 | Height: 5,3 | Tooth height: 3,05 | Pitch: 8 | No. of teeth: 64 | Material: neoprene
Timing belt, profile S8M STD/STS - flat-top semi-circular tooth shape, 8mm pitch, made endless from neoprene with premium fibreglass tension member and high-strengthtooth protection fabric, black, cut to width 50mm, Linmax Orange

€24.46
512-S8M-85
512-S8M-85
Width: 85 | Height: 5,3 | Tooth height: 3,05 | Pitch: 8 | No. of teeth: 64 | Material: neoprene
Timing belt, profile S8M STD/STS - flat-top semi-circular tooth shape, 8mm pitch, made endless from neoprene with premium fibreglass tension member and high-strengthtooth protection fabric, black, cut to width 85mm, Linmax Orange

€41.73
5120-8M-20
5120-8M-20
Design: HTD-8M | Width: 20 | Height: 6 | Tooth height: 3,38 | Pitch: 8 | No. of teeth: 640 | Material: neoprene
Toothed belt, HTD-8M profile - semi-circular tooth shape with 8mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 20mm, Linmax Orange

€64.40
5120-8M-30
5120-8M-30
Design: HTD-8M | Width: 30 | Height: 6 | Tooth height: 3,38 | Pitch: 8 | No. of teeth: 640 | Material: neoprene
Toothed belt, HTD-8M profile - semi-circular tooth shape with 8mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 30mm, Linmax Orange

€81.30
5120-8M-50
5120-8M-50
Design: HTD-8M | Width: 50 | Height: 6 | Tooth height: 3,38 | Pitch: 8 | No. of teeth: 640 | Material: neoprene
Toothed belt, HTD-8M profile - semi-circular tooth shape with 8mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 50mm, Linmax Orange

€138.02
This website uses cookies to ensure the best experience possible. More information...