INFO@CMT.GMBH
+49-2332-5510500
NO MINIMUM ORDER VALUE
WORLDWIDE SHIPPING
Go to homepage
Wishlist
Shopping cart €0.00

Linear Rolling Guidance Systems

Rolling Bearings

Rod Ends, Spherical Plain Bearings

Freewheels, Backstops

Bearing Housings

Bearing Units

Locknuts, Sleeves

Shaft Couplings

Locking Assemblies

Drive Chains, Conveyor Chains

Drive Belts, Conveyor Belts

Special Parts

Filter products

52318
52318
Bore diameter: 75 | Outer diameter: 155 | Height: 88 | Cage: steel cage | Material: standard
Axial deep groove ball bearing 523.., double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€610.22
52320
52320
Bore diameter: 85 | Outer diameter: 170 | Height: 97 | Cage: steel cage | Material: standard
Axial deep groove ball bearing 523.., double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€825.07
Sold out
52322-MP
52322-MP
Bore diameter: 95 | Outer diameter: 190 | Height: 110 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 523..-MP, double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

€1,346.25
Details
52324-MP
52324-MP
Bore diameter: 100 | Outer diameter: 210 | Height: 123 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 523..-MP, double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

€1,689.34
Sold out
52328-MP
52328-MP
Bore diameter: 120 | Outer diameter: 240 | Height: 140 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 523..-MP, double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

€2,516.86
Details
Sold out
52330-MP
52330-MP
Bore diameter: 130 | Outer diameter: 250 | Height: 140 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 523..-MP, double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

€3,187.54
Details
Sold out
52332-MP
52332-MP
Bore diameter: 140 | Outer diameter: 270 | Height: 153 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 523..-MP, double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

Price on request
Sold out
52334-MP
52334-MP
Bore diameter: 150 | Outer diameter: 280 | Height: 153 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 523..-MP, double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

Price on request
Sold out
52338-MP
52338-MP
Bore diameter: 160 | Outer diameter: 320 | Height: 183 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 523..-MP, double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

Price on request
Sold out
52407
52407
Bore diameter: 25 | Outer diameter: 80 | Height: 59 | Cage: steel cage | Material: standard
Axial deep groove ball bearing 524.., double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€215.67
Details
Sold out
52408
52408
Bore diameter: 30 | Outer diameter: 90 | Height: 65 | Cage: steel cage | Material: standard
Axial deep groove ball bearing 524.., double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€280.61
Details
52409
52409
Bore diameter: 35 | Outer diameter: 100 | Height: 72 | Cage: steel cage | Material: standard
Axial deep groove ball bearing 524.., double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€285.92
52410
52410
Bore diameter: 40 | Outer diameter: 110 | Height: 78 | Cage: steel cage | Material: standard
Axial deep groove ball bearing 524.., double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€349.23
Sold out
52411
52411
Bore diameter: 45 | Outer diameter: 120 | Height: 87 | Cage: steel cage | Material: standard
Axial deep groove ball bearing 524.., double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€399.46
Details
525-3M-15
525-3M-15
Design: HTD-3M | Width: 15 | Height: 2,4 | Tooth height: 1,22 | Pitch: 3 | No. of teeth: 175 | Material: neoprene
Toothed belt, HTD-3M profile - semi-circular tooth shape with 3mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 15mm, Linmax Orange

€4.88
525-3M-450
525-3M-450
Design: HTD-3M | Width: 450 | Height: 2,4 | Tooth height: 1,22 | Pitch: 3 | No. of teeth: 175 | Material: neoprene
Toothed belt, HTD-3M profile - semi-circular tooth shape with 3mm pitch, made endless from neoprene with premium fibreglass tension member, black, full sleeve, Linmax Orange

€151.58
525-3M-6
525-3M-6
Design: HTD-3M | Width: 6 | Height: 2,4 | Tooth height: 1,22 | Pitch: 3 | No. of teeth: 175 | Material: neoprene
Toothed belt, HTD-3M profile - semi-circular tooth shape with 3mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 6mm, Linmax Orange

€2.44
525-3M-9
525-3M-9
Design: HTD-3M | Width: 9 | Height: 2,4 | Tooth height: 1,22 | Pitch: 3 | No. of teeth: 175 | Material: neoprene
Toothed belt, HTD-3M profile - semi-circular tooth shape with 3mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 9mm, Linmax Orange

€3.21
525-5M-15
525-5M-15
Design: HTD-5M | Width: 15 | Height: 3,8 | Tooth height: 2,06 | Pitch: 5 | No. of teeth: 105 | Material: neoprene
Toothed belt, HTD-5M profile - semi-circular tooth shape with 5mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 15mm, Linmax Orange

€5.64
525-5M-25
525-5M-25
Design: HTD-5M | Width: 25 | Height: 3,8 | Tooth height: 2,06 | Pitch: 5 | No. of teeth: 105 | Material: neoprene
Toothed belt, HTD-5M profile - semi-circular tooth shape with 5mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 25mm, Linmax Orange

€8.55
525-5M-450
525-5M-450
Design: HTD-5M | Width: 450 | Height: 3,8 | Tooth height: 2,06 | Pitch: 5 | No. of teeth: 105 | Material: neoprene
Toothed belt, HTD-5M profile - semi-circular tooth shape with 5mm pitch, made endless from neoprene with premium fibreglass tension member, black, full sleeve, Linmax Orange

€173.88
525-5M-9
525-5M-9
Design: HTD-5M | Width: 9 | Height: 3,8 | Tooth height: 2,06 | Pitch: 5 | No. of teeth: 105 | Material: neoprene
Toothed belt, HTD-5M profile - semi-circular tooth shape with 5mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 9mm, Linmax Orange

€3.82
525-H-075
525-H-075
Design: H | Width: 19,05 | Height: 4,3 | Tooth height: 2,29 | Pitch: 12,7 | No. of teeth: 105 | Material: neoprene
Inch sizes timing belt, H profile - trapezoidal toothing with 12.7mm pitch, endless made of neoprene with premium fibreglass tension member, black, cut to width 19.05mm, Linmax Orange

€12.56
525-H-100
525-H-100
Design: H | Width: 25,4 | Height: 4,3 | Tooth height: 2,29 | Pitch: 12,7 | No. of teeth: 105 | Material: neoprene
Inch sizes timing belt, H profile - trapezoidal toothing with 12.7mm pitch, endless made of neoprene with premium fibreglass tension member, black, cut to width 25.4mm, Linmax Orange

€16.51
This website uses cookies to ensure the best experience possible. More information...