INFO@CMT.GMBH
+49-2332-5510500
NO MINIMUM ORDER VALUE
WORLDWIDE SHIPPING
Go to homepage
Wishlist
Shopping cart €0.00

Linear Rolling Guidance Systems

Rolling Bearings

Rod Ends, Spherical Plain Bearings

Freewheels, Backstops

Bearing Housings

Bearing Units

Locknuts, Sleeves

Shaft Couplings

Locking Assemblies

Drive Chains, Conveyor Chains

Drive Belts, Conveyor Belts

Special Parts

Filter products

Sold out
54230-MP
54230-MP
Bore diameter: 130 | Outer diameter: 215 | Height: 95,6 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 542..-MP, double direction based on two ball and cage assemblies, both housing washers of spherical design (angle-adjustable), without seating washers, open, separable, with brass cage, without lubricant, FAG

Price on request
Sold out
54232-MP
54232-MP
Bore diameter: 140 | Outer diameter: 225 | Height: 97,4 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 542..-MP, double direction based on two ball and cage assemblies, both housing washers of spherical design (angle-adjustable), without seating washers, open, separable, with brass cage, without lubricant, FAG

Price on request
Sold out
54234-MP
54234-MP
Bore diameter: 150 | Outer diameter: 240 | Height: 104,4 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 542..-MP, double direction based on two ball and cage assemblies, both housing washers of spherical design (angle-adjustable), without seating washers, open, separable, with brass cage, without lubricant, FAG

Price on request
Sold out
54236-MP
54236-MP
Bore diameter: 150 | Outer diameter: 250 | Height: 102,4 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 542..-MP, double direction based on two ball and cage assemblies, both housing washers of spherical design (angle-adjustable), without seating washers, open, separable, with brass cage, without lubricant, FAG

Price on request
Sold out
54238-MP
54238-MP
Bore diameter: 160 | Outer diameter: 270 | Height: 116,4 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 542..-MP, double direction based on two ball and cage assemblies, both housing washers of spherical design (angle-adjustable), without seating washers, open, separable, with brass cage, without lubricant, FAG

€3,866.38
Details
Sold out
54240-MP
54240-MP
Bore diameter: 170 | Outer diameter: 280 | Height: 115,6 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 542..-MP, double direction based on two ball and cage assemblies, both housing washers of spherical design (angle-adjustable), without seating washers, open, separable, with brass cage, without lubricant, FAG

Price on request
Sold out
54244-MP
54244-MP
Bore diameter: 190 | Outer diameter: 300 | Height: 115,2 | Cage: brass cage | Material: standard
Axial deep groove ball bearing 542..-MP, double direction based on two ball and cage assemblies, both housing washers of spherical design (angle-adjustable), without seating washers, open, separable, with brass cage, without lubricant, FAG

€6,379.96
Details
543-3M-15
543-3M-15
Design: HTD-3M | Width: 15 | Height: 2,4 | Tooth height: 1,22 | Pitch: 3 | No. of teeth: 181 | Material: neoprene
Toothed belt, HTD-3M profile - semi-circular tooth shape with 3mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 15mm, Linmax Orange

€4.88
543-3M-450
543-3M-450
Design: HTD-3M | Width: 450 | Height: 2,4 | Tooth height: 1,22 | Pitch: 3 | No. of teeth: 181 | Material: neoprene
Toothed belt, HTD-3M profile - semi-circular tooth shape with 3mm pitch, made endless from neoprene with premium fibreglass tension member, black, full sleeve, Linmax Orange

€128.30
543-3M-6
543-3M-6
Design: HTD-3M | Width: 6 | Height: 2,4 | Tooth height: 1,22 | Pitch: 3 | No. of teeth: 181 | Material: neoprene
Toothed belt, HTD-3M profile - semi-circular tooth shape with 3mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 6mm, Linmax Orange

€2.44
543-3M-9
543-3M-9
Design: HTD-3M | Width: 9 | Height: 2,4 | Tooth height: 1,22 | Pitch: 3 | No. of teeth: 181 | Material: neoprene
Toothed belt, HTD-3M profile - semi-circular tooth shape with 3mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 9mm, Linmax Orange

€3.29
543-S3M-15
543-S3M-15
Design: STD/STS-S3M | Width: 15 | Height: 2,2 | Tooth height: 1,14 | Pitch: 3 | No. of teeth: 181 | Material: neoprene
Timing belt, profile S3M STD/STS - flat-top semi-circular tooth shape, 3mm pitch, made endless from neoprene with premium fibreglass tension member and high-strengthtooth protection fabric, black, cut to width 15mm, Linmax Orange

€6.58
543-S3M-450
543-S3M-450
Design: STD/STS-S3M | Width: 450 | Height: 2,2 | Tooth height: 1,14 | Pitch: 3 | No. of teeth: 181 | Material: neoprene
Timing belt, profile S3M STD/STS - flat-top semi-circular tooth shape, 3mm pitch, made endless from neoprene with premium fibreglass tension member and high-strength nylon tooth protection fabric, black, full sleeve, Linmax Orange

€140.04
543-S3M-6
543-S3M-6
Design: STD/STS-S3M | Width: 6 | Height: 2,2 | Tooth height: 1,14 | Pitch: 3 | No. of teeth: 181 | Material: neoprene
Timing belt, profile S3M STD/STS - flat-top semi-circular tooth shape, 3mm pitch, made endless from neoprene with premium fibreglass tension member and high-strengthtooth protection fabric, black, cut to width 6mm, Linmax Orange

€3.39
543-S3M-9
543-S3M-9
Design: STD/STS-S3M | Width: 9 | Height: 2,2 | Tooth height: 1,14 | Pitch: 3 | No. of teeth: 181 | Material: neoprene
Timing belt, profile S3M STD/STS - flat-top semi-circular tooth shape, 3mm pitch, made endless from neoprene with premium fibreglass tension member and high-strengthtooth protection fabric, black, cut to width 9mm, Linmax Orange

€4.39
544-8M-20
544-8M-20
Design: HTD-8M | Width: 20 | Height: 6 | Tooth height: 3,38 | Pitch: 8 | No. of teeth: 68 | Material: neoprene
Toothed belt, HTD-8M profile - semi-circular tooth shape with 8mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 20mm, Linmax Orange

€7.63
544-8M-30
544-8M-30
Design: HTD-8M | Width: 30 | Height: 6 | Tooth height: 3,38 | Pitch: 8 | No. of teeth: 68 | Material: neoprene
Toothed belt, HTD-8M profile - semi-circular tooth shape with 8mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 30mm, Linmax Orange

€11.29
544-8M-50
544-8M-50
Design: HTD-8M | Width: 50 | Height: 6 | Tooth height: 3,38 | Pitch: 8 | No. of teeth: 68 | Material: neoprene
Toothed belt, HTD-8M profile - semi-circular tooth shape with 8mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 50mm, Linmax Orange

€19.08
544-8M-85
544-8M-85
Design: HTD-8M | Width: 85 | Height: 6 | Tooth height: 3,38 | Pitch: 8 | No. of teeth: 68 | Material: neoprene
Toothed belt, HTD-8M profile - semi-circular tooth shape with 8mm pitch, made endless from neoprene with premium fibreglass tension member, black, cut to width 85mm, Linmax Orange

€32.20
544-MXL-012
544-MXL-012
Design: MXL | Width: 3,175 | Height: 1,14 | Tooth height: 0,51 | Pitch: 2,032 | No. of teeth: 680 | Material: neoprene
Inch sizes timing belt, MXL profile - trapezoidal toothing with 2.032mm pitch, endless made of neoprene with premium fibreglass tension member, black, cut to width 3.175mm, Linmax Orange

€7.75
544-MXL-019
544-MXL-019
Design: MXL | Width: 4,763 | Height: 1,14 | Tooth height: 0,51 | Pitch: 2,032 | No. of teeth: 680 | Material: neoprene
Inch sizes timing belt, MXL profile - trapezoidal toothing with 2.032mm pitch, endless made of neoprene with premium fibreglass tension member, black, cut to width 4.763mm, Linmax Orange

€8.16
544-MXL-025
544-MXL-025
Design: MXL | Width: 6,35 | Height: 1,14 | Tooth height: 0,51 | Pitch: 2,032 | No. of teeth: 680 | Material: neoprene
Inch sizes timing belt, MXL profile - trapezoidal toothing with 2.032mm pitch, endless made of neoprene with premium fibreglass tension member, black, cut to width 6.35mm, Linmax Orange

€11.88
544-MXL-450
544-MXL-450
Design: MXL | Height: 1,14 | Tooth height: 0,51 | Pitch: 2,032 | No. of teeth: 680 | Material: neoprene
Inch sizes timing belt, MXL profile - trapezoidal toothing with 2.032mm pitch, endless made of neoprene with premium fibreglass tension member, black, full sleeve, Linmax Orange

€172.49
544-S8M-20
544-S8M-20
Width: 20 | Height: 5,3 | Tooth height: 3,05 | Pitch: 8 | No. of teeth: 68 | Material: neoprene
Timing belt, profile S8M STD/STS - flat-top semi-circular tooth shape, 8mm pitch, made endless from neoprene with premium fibreglass tension member and high-strengthtooth protection fabric, black, cut to width 20mm, Linmax Orange

€10.67
This website uses cookies to ensure the best experience possible. More information...