R060202030

€88.81

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1072872

Manufacturer: Rexroth

Weight: 0.103 kg

Product information "R060202030"

Standard linear bushing KBM-20-DD-NR, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, stainless steel guide cage, with two integrated wiper seals, ungreased, Rexroth

Bore diameter:	20
Outer diameter:	32
Lenght:	45
Material:	сorrosion-resistant

Similar products

Sold out

R067122076

Super linear bushing KBA-O-20-DD with misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with two integrated wiper seals, Rexroth

€43.37

Details

Sold out

PFP32

Cam follower PFP.., with reinforced smooth stud design, with convex outer ring, seals on both sides, Nadella

€90.86

Details

R067022040

Super linear bushing KBA-20-DD with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with wiper seal on one side, Rexroth

€41.29

Sold out

R073222040

Super linear bushing KBH-20-DD for high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with two integrated wiper seals, Rexroth

€66.35

Details

KR32-EE

Stud type track roller, with axial guidance, concentric, sealed on both sides with plastic axial plain washers, NRB

€12.87

DSI12-T/K M12x1,25

Standard rod end DSI..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, series K, female right hand thread, zinc plated, maintenance-free, Durbal

€8.66

Sold out

R074022030

Standard linear bushing KBMF-20-DD-NR with square flange, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€153.48

Details

61804-2Z-HLC

Single row deep groove ball bearing 618.., radial, with steel cage and sheet steel shields on both sides, FAG

€9.51

Sold out

BRTM16-90-501

Heavy-duty rod end BRTM.. in stainless steel, with integral self-aligning roller bearing, series K, male right hand thread, full complement design, with shields on both sides, relubricatable, Durbal

€207.11

Details

PAP2830-P10 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€159.43

7201-B-XL-JP

Angular contact ball bearing 72..-B-JP, single-row, contact angle α = 40°, with sheet steel cage, open - without seals, not greased, FAG

€13.42

Sold out

BRTF12-91-501

Heavy-duty rod end BRTF.. in stainless steel, with integral self-aligning roller bearing, series K, fine female right hand thread, full complement design, with shields on both sides, relubricatable, Durbal

€194.93

Details

PAP2830-P200 - 1000x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€4,013.69

ZM20

Precision locknut ZM, light series, for preloading bearings for screw drives, radially clampable with locking pins, INA

€83.10

Sold out

WLT12-60-500

Heavy-duty spherical bearing WLT.. with integral self-aligning roller bearing in stainless steel, cage design, with long-term greasing and shields on both sides, Durbal

€170.40

Details