R065801296

€10.41

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1113820

Manufacturer: Rexroth

Weight: 0.015 kg

Product information "R065801296"

Compact ball bushing KBC-12, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, without wiper seals, without grease, Rexroth

Bore diameter:	12
Outer diameter:	19
Lenght:	28
Material:	standard

Similar products

GR12X19X3-C

Single-lip sealing ring GR.., contacting radial rotary shaft seals, for sealing needle roller bearings, NBR elastomer with external steel reinforcement, INA

€3.01

NKX10-Z-TV-XL

Needle roller/axial ball bearing NKX..-Z, combined axial radial bearings, without inner ring, single direction axial component with ball cage, retained by protective cap, INA

€30.54

NATR6-PP-A

Yoke type track roller NATR.., single row, thick-walled outer ring with profiled surface, axial guidance via thrust washers, with inner ring and needle roller and cage assembly, three-stage sealing on both sides, INA

€17.94

STO6-TV

Yoke type track roller STO.., needle roller bearings, single row, thick-walled outer ring with profiled outside surface, with inner ring and needle roller and cage assembly (polyamide cage), without axial guidance, open, not self-retaining, INA

€15.03

KRE19

Stud type track roller KRE.. with eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with crowning profile R500, gap seals on both sides, INA

€37.42

KR19-X

Stud type track roller KR..X without eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with cylindrical profile, gap seals on both sides, INA

€30.26

KRV19-PP-A-NMT

Stud type track roller KRV.. without eccentric, outer ring profile optimized, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€32.12

Sold out

GCR19-EEM-SW

Full complement single row track roller GCR... with threaded stud, profiled outer ring with optimized radius, eccentric, metal shielded, incl. lock washer and nut, Nadella

€87.19

Details

Sold out

GCL19-SW.1

Full complement single row track roller GCL.. with threaded stud, with optimized cylindrical outer ring, concentric, without seals, incl. lock washer and nut, Nadella

€88.11

Details

Sold out

R065805100

Compact ball bushing KBC-12-RT, ball bushing guides, standard material, POM ball retainer, reduced radial internal clearance, without wiper seals, without grease, Rexroth

€10.41

Details

Sold out

R065815140

Compact ball bushing KBC-12-D-RT, ball bushing guides, standard material, POM ball retainer, reduced radial internal clearance, wiper seal on one side, without grease, Rexroth

€10.91

Details

Sold out

R065825140

Compact ball bushing KBC-12-DD-RT, ball bushing guides, standard material, POM ball retainer, reduced radial internal clearance, wiper seals integrated on both sides, without grease, Rexroth

€11.48

Details

Sold out

R067221040

Super linear bushing KBB-10-DD without misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with two integrated wiper seals, Rexroth

€28.70

Details

DGE10-E

Radial spherical-plain bearing DGE..-E, sliding combination steel-steel, series E, phosphated, outer ring with single split, Durbal

€3.03

KR19-PP

Track roller with solid roller stud, with cage-guided needles, outer ring with crowned profile R500, with screw driver slot, seals on both sides, IDC

€22.83