R065805556

€18.75

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1113841

Manufacturer: Rexroth

Weight: 0.078 kg

Product information "R065805556"

Compact ball bushing KBC-30-RT, ball bushing guides, standard material, POM ball retainer, reduced radial internal clearance, without wiper seals, without grease, Rexroth

Bore diameter:	30
Outer diameter:	40
Lenght:	50
Material:	standard

Similar products

PWTR17-2RS

Yoke type track roller with profiled outer ring (contact optimized surface), with center rib and cylindrical rollers, full complement roller set, seals on both sides, IDC

€35.43

Sold out

R073122545

Super linear bushing KBSH-O-25-VD for very high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with complete sealing, Rexroth

€154.10

Details

LR202-2RSR>A

Single row track roller LR2.., deep groove ball bearing based, without pin, thick-walled outer ring with crowned lateral surface of R=500mm, with plastic cage, lip seals on both sides, INA

€18.08

KH30-P

Linear ball bearing KH.. for shaft guidance systems, compact range, outer ring machined, hardened, perforated, with ball and cage assembly integrated in plastic cage, one side sealed, relubricatable, INA

€14.70

KB25

Linear ball bearing KB.. for shaft guidance systems, machined range, closed design, outer ring hardened and ground, high-precision guidance in plastic cage, without seals, INA

€40.63

Sold out

51204

Axial deep groove ball bearing, single direction, separable, NTN

€7.98

Details

2203-2RS-TVH

Self-aligning ball bearing 22.., double row radial ball bearings, cylindrical bore, with plastic cage, greased, seals on both sides, FAG

€22.07

AS17 - US17

Built-in roller freewheel US.., dimensions according to ball bearing 62.., non self-centering (non bearing supported), one keyway on the inner ring, CTS

€72.39

N203-E-XL-TVP2

Single row cylindrical roller bearing N2.., non-locating bearing, outer ring without ribs, inner ring with two ribs, cylindrical bore, open, non-greased, separable, with solid plastic cage, FAG

€29.35

Sold out

GCU40-MM

Full complement single row track roller GCU.. with threaded stud, with profiled outer ring, concentric, metal shielded, incl. lock washer and nut, Nadella

€146.21

Details

GYE15-KRR-B-VA-HLA

Corrosion-resistant radial insert ball bearing GYE.., spherical outer ring surface, grub screws in inner ring for location on shaft, compensating for misalignment, sealed on both sides, with plastic cage, relubricatable, INA

€64.72

Sold out

FRR40-EU-AZ-NX

Corrosion-resistant Euroroller FRR..-EU-AZ with double row angular contact ball bearing, pin with through-hole in inner ring, light convex raceway side, eccentric, with NBR seals type RS on both sides, Nadella

Price on request

RAE17-XL-NPP-FA106

Radial insert ball bearing RAE.., noise-tested, cylindrical outer ring, with eccentric locking collar for mounting on shaft, sealed on both sides, with plastic cage, not relubricatable, INA

€14.68

Sold out

FR40-EI

Guide roller FR..-EI, special rollers, with double row ball bearing, concentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella

€88.86

Details

ROTEX 19 ST - MatNr: 020195121215

ROTEX 19 ST hub 1.0 Ø12,7+0,0254 key code TA > b=3,175+0,051 (ANSI/AGMA 9002-C14 Ø1/2"x1/8") component 1a - #020195121215, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€18.38