R065805956
Product information "R065805956"
| Bore diameter: | 16 |
|---|---|
| Outer diameter: | 24 |
| Lenght: | 30 |
| Material: | standard |
Similar products
Product number:
1113847
Manufacturer:
Rexroth
Weight:
0.024 kg
Compact ball bushing KBC-16, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, without wiper seals, without grease, Rexroth
Skip product gallery
Sold out
RNA14601-B6
Regular price:
€32.85
Full complement needle cam follower RNA1..-B6, with solid convex outer ring, max. slope of 0.15%, without inner ring (for combination with inner rings BI.., BIC..), Nadella
Sold out
GC24-EEM-SW
Regular price:
€71.49
Full complement single row track roller GC.. with threaded stud, profiled outer ring with optimized radius, concentric, metal shielded, incl. lock washer and nut, Nadella
Sold out
ZKLFA0640-2RS
Regular price:
€390.33
Double row axial angular contact ball bearing with flange, precision bearings for screw mounting, with fixing holes, gap seals on both sides, INA
NA4901-XL
Regular price:
€15.58
Needle roller bearing of series NA49.., single row, outer ring with two ribs, inner ring without ribs (removable), steel cage, open design, INA
HK1812-B
Regular price:
€3.40
Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, single-row non-sealed design, with steel cage, without lubrication hole, INA
Sold out
NAO12X24X13
Regular price:
€13.97
Single row needle roller bearing NAO.., radial needle roller bearings, non-locating, without ribs on outer ring, with inner ring, non-self-retaining, steel cage, open, INA
LS1024
Regular price:
€2.64
Bearing washer LS.., axial bearing washers, can be used as housing or shaft washer, suitable for needle roller and cage assemblies AXK.. and cylindrical roller and cage assemblies K811.., raceways hardened and ground, INA
HK1816-2RS-AS1-L271
Regular price:
€7.21
Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, single-row design, sealed on both sides, with steel cage, with lubrication hole, INA
Sold out
R065811630
Regular price:
€27.94
Compact ball bushing KBC-16-D-NR, ball bushing guides, stainless material, POM ball retainer, normal radial internal clearance, wiper seal on one side, without grease, Rexroth
PAW12-P10 - 500x
Regular price:
€371.28
Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®
PM06-00-502
Regular price:
€53.85
Heavy-duty rod end PM.. with integral self-aligning ball bearing, male left hand thread, with shields on both sides, relubricatable, Durbal
PAW12-P200 - 500x
Regular price:
€450.45
Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®
BEFN08-20-501
Regular price:
€18.82
Heavy-duty rod end BEFN.. with pressed spherical-plain bearing, sliding pair steel-brass, series K, female right hand thread, zinc plated, relubricatable, Durbal
LBBR16-2LS
Regular price:
€9.72
Compact linear ball bearing LBBR (ball and cage assembly), closed design, double lip seals on both sides, lifetime lubricated, Ewellix