R065821674

Bore diameter:	16
Outer diameter:	24
Lenght:	30
Material:	standard

PAW12-P10 - 1x

Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

Price on request

Sold out

HK1812-AS1-B

Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, single-row non-sealed design, with steel cage, with lubrication hole, INA

Price on request

Sold out

GCL24-EE-SW

Full complement single row track roller GCL.. with threaded stud, with optimized cylindrical outer ring, concentric, with plastic seals, incl. lock washer and nut, Nadella

Price on request

PAW12-P200 - 1x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

Price on request

Sold out

DLF1812

Full complement needle bush DLF.., closed end design, needles retained, thin hardened calibrated outer ring made of drawn strip steel, without inner ring, Nadella

Price on request

Sold out

RNA4901

Needle roller bearing of series RNA49.., single row, outer ring with two ribs, without inner ring, steel cage, IDC

Price on request

Sold out

GCRL24-EE-SW

Full complement single row track roller GCRL.. with threaded stud, with optimized cylindrical outer ring, eccentric, with plastic seals, incl. lock washer and nut, Nadella

Price on request

Sold out

GCRL24-EEM-SW

Full complement single row track roller GCRL.. with threaded stud, with optimized cylindrical outer ring, eccentric, metal shielded, incl. lock washer and nut, Nadella

Price on request

Sold out

RNA6901

Needle roller bearing of series RNA69.., single row, outer ring with three ribs, without inner ring, steel cage, IDC

Price on request

AS1024

Thrust bearing washer AS.., suitable for axial needle roller and cage assemblies AXK.., for use as a shaft or housing washer, stamped, through-hardened, polished, INA

€0.51

SD16X24X3-A

Double-lip sealing ring SD.., contacting radial rotary shaft seals, for sealing needle roller bearings, consisting of two plastic components: Polyamide body and sealing element made of PU elastomer, INA

€1.54

SD18X24X3-A

Double-lip sealing ring SD.., contacting radial rotary shaft seals, for sealing needle roller bearings, consisting of two plastic components: Polyamide body and sealing element made of PU elastomer, INA

€1.62

609-HLN

Single row deep groove ball bearing 60.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€1.88

AXK1024-A/0-10

Axial needle roller and cage assembly AXK.., axial roller bearings, single direction, dimensionally stable cage made from sheet steel, for direct mounting or in combination with axial bearing washers AS.., INA

€1.99

G16X24X3-C

Single-lip sealing ring G.., contacting radial rotary shaft seals, for sealing needle roller bearings, NBR-coated stiffening ring with a rubber shaft profile, INA

€2.36

Product information "R065821674"