R065825534

€45.36

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1113933

Manufacturer: Rexroth

Weight: 0.084 kg

Product information "R065825534"

eLINE ball bushing KBC-30-DD-RT-NR-G, ball bushing guides, stainless material, POM ball retainer, reduced radial internal clearance, wiper seals integrated on both sides, with grease, Rexroth

Bore diameter:	30
Outer diameter:	40
Lenght:	50
Material:	сorrosion-resistant

Similar products

Sold out

PM12-01-502

Heavy-duty rod end PM.. with integral self-aligning ball bearing, fine male left hand thread, with shields on both sides, relubricatable, Durbal

€71.33

Details

Sold out

R067005400

Super linear bushing KBA-25-RT with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, without wiper seals, Rexroth

€69.41

Details

STO17

Yoke type track roller STO.., needle roller bearings, single row, thick-walled outer ring with profiled outside surface, with inner ring and needle roller and cage assembly (steel cage), without axial guidance, open, not self-retaining, INA

€30.55

KRVE40-PP

Eccentric full complement stud type track roller, profiled outer ring (contact optimized surface), with hexagon socket, seals on both sides, IDC

€50.99

Sold out

R063102500

Standard linear bushing KBM-O-25-D, linear bushings, open robust all-metal design, hardened and ground sleeve, with locating hole for axial and radial securing, steel guide cage, with wiper seal on one side, ungreased, Rexroth

€47.54

Details

KR40-X-B-NMT

Stud type track roller KR..X without eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with cylindrical profile, gap seals on both sides, incl. nut and lub. nipple, INA

€55.39

PWTR17-2RS

Yoke type track roller with profiled outer ring (contact optimized surface), with center rib and cylindrical rollers, full complement roller set, seals on both sides, IDC

€35.43

Sold out

R073122545

Super linear bushing KBSH-O-25-VD for very high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with complete sealing, Rexroth

€154.10

Details

LR202-2RSR>A

Single row track roller LR2.., deep groove ball bearing based, without pin, thick-walled outer ring with crowned lateral surface of R=500mm, with plastic cage, lip seals on both sides, INA

€18.08

KH30-P

Linear ball bearing KH.. for shaft guidance systems, compact range, outer ring machined, hardened, perforated, with ball and cage assembly integrated in plastic cage, one side sealed, relubricatable, INA

€14.70

KB25

Linear ball bearing KB.. for shaft guidance systems, machined range, closed design, outer ring hardened and ground, high-precision guidance in plastic cage, without seals, INA

€40.63

Sold out

51204

Axial deep groove ball bearing, single direction, separable, NTN

€7.98

Details

2203-2RS-TVH

Self-aligning ball bearing 22.., double row radial ball bearings, cylindrical bore, with plastic cage, greased, seals on both sides, FAG

€22.07

AS17 - US17

Built-in roller freewheel US.., dimensions according to ball bearing 62.., non self-centering (non bearing supported), one keyway on the inner ring, CTS

€72.39

N203-E-XL-TVP2

Single row cylindrical roller bearing N2.., non-locating bearing, outer ring without ribs, inner ring with two ribs, cylindrical bore, open, non-greased, separable, with solid plastic cage, FAG

€29.35