R067012076

€40.30

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1113979

Manufacturer: Rexroth

Weight: 0.06 kg

Product information "R067012076"

Super linear bushing KBA-20-D with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with wiper seal on one side, Rexroth

Bore diameter:	20
Outer diameter:	32
Lenght:	45
Material:	standard

Similar products

EF12-21-502

Heavy-duty rod end EF.. with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series E/EH, fine female left hand thread, galvanized, maintenance-free, Durbal

€19.11

PAW18-P200 - 25x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€59.00

Sold out

RNAO20X32X12-XL

Single row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, without inner ring, non-self-retaining, steel cage, open, INA

€20.70

Details

Sold out

BEFN12-81-502

Heavy-duty rod end BEFN.. in stainless steel, with pressed spherical-plain bearing, sliding pair steel-brass, series K, fine female left hand thread, relubricatable, Durbal

€40.56

Details

16002-A-C3

Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€5.60

KR32-X-PP

Track roller with solid roller stud, with cage-guided needles and cylindrical outer ring, with hexagon socket, seals on both sides, IDC

€35.21

KRV32-PP-A-NMT

Stud type track roller KRV.. without eccentric, outer ring profile optimized, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€45.75

Sold out

KB20-PP-RROC-AS

Corrosion-resistant linear ball bearing KB.. for shaft guidance systems, machined range, closed design, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, relubricatable, INA

€45.97

Details

3002-2RS

Double row angular contact ball bearing 30.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, seals on both sides, INA

€20.15

CSK12-P - UKC12-ZZ

Sprag type freewheel UKC.., ball bearing freewheels, dimensions according to ball bearing 62.., self-centering, one keyway on the inner ring, shielded on both sides, operating temperature -10°C to +60°C, CTS

€34.41

KBS20-PP-AS

Linear ball bearing KBS.. for shaft guidance systems, machined range, slotted design, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, relubricatable, INA

€38.24

Sold out

GCR32-EE-SW

Full complement single row track roller GCR.. with threaded stud, profiled outer ring with optimized radius, eccentric, with plastic seals, incl. lock washer and nut, Nadella

€119.06

Details

Sold out

52202

Axial deep groove ball bearing 522.., double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€29.12

Details

FRR32-EU-NX

Corrosion-resistant Euroroller FRR..-EU, with double row angular contact ball bearing, light convex raceway side, eccentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella

€144.71

Sold out

RNAB11012

Full complement needle cam follower RNAB11.., with solid convex outer ring, max. slope of 1,5%, without inner ring (for combination with inner rings BI.., BIC..), Nadella

Price on request