R067125045

Bore diameter:	50
Outer diameter:	75
Lenght:	100
Material:	standard

SL045009-PP-2NR

Double row cylindrical roller bearing SL04.. with full complement roller set, locating bearing, three fixed ribs on inner ring, one fixed center rib on outer ring, sealed on both sides, incl. retaining rings, INA

€101.20

ZKLN4075-2RS-XL

Double row axial angular contact ball bearing, precision bearings for screw mounting, without fixing holes, seals on both sides, INA

€490.92

16009-A-C3

Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€13.97

Sold out

KBO50-P

Linear ball bearing KBO.. for shaft guidance systems, machined range, open design - segment cut-out, outer ring hardened and ground, high-precision guidance in plastic cage, one side sealed, INA

Price on request

Sold out

RKUR75-NX-V

Corrosion-resistant guide roller RKUR.. with tapered roller bearing, locating roller, convex raceway side, radius R = 400, eccentric, with Viton-seals (up to 120°C), incl. lock washers and nuts, Nadella

€615.75

Details

Sold out

R073205000

Super linear bushing KBH-50 for high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, without wiper seals, Rexroth

€194.26

Details

PAP7050-P10 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€1,407.72

Sold out

R067305000

Super linear bushing KBB-O-50 without misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, without wiper seals, Rexroth

€136.05

Details

PAP7050-P11 - 1x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€46.33

DGE50-ES

Radial spherical-plain bearing DGE..-ES, sliding combination steel-steel, series E, phosphated, outer ring with single split, relubricatable, Durbal

€13.71

PAP7040-P200 - 25x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€402.74

NCF3009-V

Single row cylindrical roller bearing, support bearing, two fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling set, IDC

€54.24

PAP7040-P180 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€1,391.21

7009-U-C-G-GN-P42

Super precision angular contact ball bearing (spindle bearing), contact angle α = 15°, universal design, NTN

€119.03

PAP7040-P180 - 1x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€14.93

Product information "R067125045"