R073002000

€99.74

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1114057

Manufacturer: Rexroth

Weight: 0.091 kg

Product information "R073002000"

Super linear bushing KBSH-20 for very high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, without wiper seals, Rexroth

Bore diameter:	20
Outer diameter:	32
Lenght:	45
Material:	standard

Similar products

BRM12-00-501

Heavy-duty rod end BRM.. with integral self-aligning ball bearing, series K, male right hand thread, cage design, galvanized, with shields on both sides, relubricatable, Durbal

€52.04

NK24/20-XL

Needle roller bearing NK.., light series, open single row design, ribs on outer ring, without inner ring, steel cage, INA

€13.08

Sold out

WLK12-60-500

Heavy-duty spherical bearing WLK.. with integral self-aligning ball bearing, full complement design, stainless steel, with long-term greasing and shields on both sides, Durbal

€142.66

Details

IR29X32X13-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€7.56

EM12-60-502

Heavy-duty rod end EM.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series E/EH, male left hand thread, maintenance-free, Durbal

€38.17

NATV12-X-PP-A

Yoke type track roller NATV.., single row, thick-walled outer ring with cylindrical surface, axial guidance via thrust washers, with inner ring, full complement, three-stage sealing on both sides, INA

€35.95

Sold out

BEFN12-21-502

Heavy-duty rod end BEFN.. with pressed spherical-plain bearing, sliding pair steel-brass, series K, fine female left hand thread, zinc plated, relubricatable, Durbal

€24.01

Details

RNA2201-2RSR

Yoke type track roller RNA22.., needle roller bearings, single row, thick-walled outer ring with profiled outside surface, without inner ring, with needle roller and cage assembly (steel cage), without axial guidance, lip seals on both sides, INA

€25.01

Sold out

LR5

Adjusting nut LR.., spring nuts for precise adjustment, radial locking, standard clamping system with a clamping screw on spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€73.12

Details

KR32-X-PP-A-NMT

Stud type track roller KR..X without eccentric, outer ring with cylindrical profile, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€49.12

NATV12-PP

Yoke type track roller with profiled outer ring (contact optimized surface), with inner ring, full complement needle set, seals on both sides, IDC

€25.49

3201-BB-TVH

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, open design with plastic cage, FAG

€19.56

CLK300 28x32

High-quality internal clamping set CLK300, backlash-free shaft-hub connection, non-self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

€4.10

KBO20-PP-AS

Linear ball bearing KBO.. for shaft guidance systems, machined range, open design - segment cut-out, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, relubricatable, INA

€46.60

GC32-EE-SW

Full complement single row track roller GC.. with threaded stud, profiled outer ring with optimized radius, concentric, with plastic seals, incl. lock washer and nut, Nadella

€91.59