R073312540

€84.24

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1114116

Manufacturer: Rexroth

Weight: 0.13 kg

Product information "R073312540"

Super linear bushing KBH-O-25-D for high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth

Bore diameter:	25
Outer diameter:	40
Lenght:	58
Material:	standard

Similar products

NATR17-X-PP

Yoke type track roller with cylindrical outer ring, with inner ring and needle cage, seals on both sides, IDC

€33.11

Sold out

R065022530

Standard linear bushing KBMT-25-DD-NR, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, stainless steel guide cage and retaining rings, with two integrated wiper seals, ungreased, Rexroth

€227.61

Details

KRV40-PP-A

Stud type track roller KRV.. without eccentric, outer ring profile optimized, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, INA

€54.11

E312-INOX-2RS

Corrosion-resistant profiled guide roller E..-2RS with pin, double row bearing, усcentric, seals on both sides, incl. lock washer and nuts, CTS

€51.28

Sold out

R074123030

Standard linear bushing KBMFT-30-DD-NR, tandem with square flange, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€552.05

Details

LR202-X-2RSR>A

Single row track roller LR2.., deep groove ball bearing based, without pin, thick-walled outer ring with cylindrical outer surface, with plastic cage, lip seals on both sides, INA

€19.89

KN25-B-PP

Linear ball bearing KN.. for shaft guidance systems, lightweight range, closed design, plastic cage with inserted raceway plates, angle-adjustable, relubricatable, seals on both sides, INA

€37.08

KBO25-PP

Linear ball bearing KBO.. for shaft guidance systems, machined range, open design - segment cut-out, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, INA

€55.37

CLK250 28x40

High-quality internal clamping set CLK250, backlash-free shaft-hub connection, non-self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

€13.24

Sold out

3203-BD-XL-2Z-C3

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, with steel cage and sheet steel shields on both sides, FAG

€29.63

Details

Sold out

FG1740-EEM-SW

Full complement single row track roller FG.. without pin, thick-walled profiled outer ring with optimized radius, lubrication hole on inner ring, metal shielded, Nadella

€74.94

Details

NUP2203-E-XL-TVP2-C3

Single row cylindrical roller bearing NUP2.., locating bearing, two locating ribs on outer ring, inner ring with locating rib and rib washer, cylindrical bore, open, non-greased, with solid plastic cage, FAG

€29.65

FRR40-EU-AS

Euroroller FRR..-EU-AS with double row angular contact ball bearing, pin with internal thread in inner ring, eccentric, with NBR seals type RS on both sides, Nadella

€95.14

GYE16-XL-KRR-B

Radial insert ball bearing GYE.., spherical outer ring surface, grub screws in inner ring for location on shaft, compensating for misalignment, sealed on both sides, with plastic cage, relubricatable, INA

€14.52

FRNR40

Special guide roller FRNR.. with needle roller bearing, raceway with O-ring, slighly convex raceway sides, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€250.58