R073314040

€133.51

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1114118

Manufacturer: Rexroth

Weight: 0.36 kg

Product information "R073314040"

Super linear bushing KBH-O-40-D for high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth

Bore diameter:	40
Outer diameter:	62
Lenght:	80
Material:	standard

Similar products

7305-B-XL-TVP

Angular contact ball bearing 73..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG

€17.66

PWTR30-2RS

Yoke type track roller with profiled outer ring (contact optimized surface), with center rib and cylindrical rollers, full complement roller set, seals on both sides, IDC

€50.77

NU305-E-XL-TVP2-C3

Single row cylindrical roller bearing NU3.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with plastic cage, FAG

€25.11

Sold out

ZARN2062-L-TV-A

Needle roller axial cylindrical roller bearing ZARN-L with long shaft locating washer, combined axial radial high-precision bearings for screw drives, heavy series, double direction, without locating holes, INA

€584.67

Details

Sold out

22206-EAK-W33

Double row spherical roller bearing, series 222, tapered bore, steel cage, groove and lubrication holes on outer ring, SNR

€34.66

Details

NJ2206-E-XL-M1

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with two-piece roller guided brass cage, FAG

€72.15

NK50/35-TV-XL

Needle roller bearing NK.., light series, open single row design, ribs on outer ring, without inner ring, plastic cage, INA

€27.51

7908-U-C-G-GN-P42

Super precision angular contact ball bearing (spindle bearing), contact angle α = 15°, universal design, NTN

€86.43

NU2206-E-XL-M1

Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with brass cage, FAG

€68.14

NKX50-Z-XL

Needle roller/axial ball bearing NKX..-Z, combined axial radial bearings, without inner ring, single direction axial component with ball cage, retained by protective cap, INA

€96.27

NFR20 - GF20

Roller type freewheel GF.., self-centering, sliding steel on steel, one keyway on the inner ring, CTS

€138.57

NUP305-E-XL-TVP2

€34.62

NUKR62-A

Stud type track roller NUKR.., solid roller pin, thick-walled outer ring with profiled outer surface, with axial guidance, full complement double-row cylindrical roller set, labyrinth seals on both sides, INA

€100.09

GCL62-SW

Full complement single row track roller GCL.. with threaded stud, with optimized cylindrical outer ring, concentric, without seals, incl. lock washer and nut, Nadella

€205.41

GYE30-KRR-B-FA107-VA-HLA

Corrosion-resistant radial insert ball bearing GYE.., spherical outer ring surface, grub screws in inner ring for location on shaft, compensating for misalignment, sealed on both sides, with plastic cage, relubricatable, INA

€77.02