R073322040

€69.98

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1114121

Manufacturer: Rexroth

Weight: 0.065 kg

Product information "R073322040"

Super linear bushing KBH-O-20-DD for high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with two integrated wiper seals, Rexroth

Bore diameter:	20
Outer diameter:	32
Lenght:	45
Material:	standard

Similar products

Sold out

FG1232-EE-SW

Full complement single row track roller FG.. without pin, thick-walled profiled outer ring with optimized radius, lubrication hole on inner ring, with plastic seals, Nadella

€67.12

Details

1201-TVH-C3

Self-aligning ball bearing 12.., double row radial ball bearings, cylindrical bore, open, with plastic cage, not greased, FAG

€14.08

Sold out

FR32-EU-AZ

Euroroller FR..-EU-AZ with double row angular contact ball bearing, pin with through-hole in inner ring, light convex raceway side, concentric, with NBR seals type RS on both sides, Nadella

€101.38

Details

HK2516-2RS-L271

Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, single-row design, sealed on both sides, with steel cage, without lubrication hole, INA

€5.77

Sold out

FR32

Guide roller FR.., special rollers, two separate modified ball bearings, concentric, sealed, incl. lock washer and nuts, Nadella

Price on request

Sold out

R067022076

Super linear bushing KBA-20-DD with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with wiper seal on one side, Rexroth

€41.29

Details

Sold out

NA1015

Full complement needle roller bearing NA1.., complete bearing, assembly of solid through-hardened outer ring RNA1.. with needle rollers set and BI1.. inner ring, without lubrication hole and groove, Nadella

€70.56

Details

Sold out

R065022030

Standard linear bushing KBMT-20-DD-NR, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, stainless steel guide cage and retaining rings, with two integrated wiper seals, ungreased, Rexroth

€158.57

Details

Sold out

MB3A

Securing plate MB..A, reinforced design, to secure metric lock nuts KM.. and HM.. on shafts or adapter sleeves by means of tab bending, according to DIN 5406, made of steel, BGL

€0.68

Details

DSAL12-T/K M12x1,25

Standard rod end DSAL..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, series K, male left hand thread, zinc plated, maintenance-free, Durbal

€8.66

Sold out

R074052000

Standard linear bushing KBMF-20-DD with square flange, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€61.53

Details

6201-C-2Z

Single row deep groove ball bearing 62.., radial, with steel cage and sheet steel shields on both sides, FAG

€2.11

Sold out

BRTM12-60-502

Heavy-duty rod end BRTM.. in stainless steel, with integral self-aligning roller bearing, series K, male left hand thread, cage design, with shields on both sides, relubricatable, Durbal

€182.63

Details

PAP2830-P10 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€2,405.72

Sold out

BRTF12-61-502

Heavy-duty rod end BRTF.. in stainless steel, with integral self-aligning roller bearing, series K, fine female left hand thread, cage design, with shields on both sides, relubricatable, Durbal

€182.63

Details