R074051600

€50.69

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1114145

Manufacturer: Rexroth

Weight: 0.093 kg

Product information "R074051600"

Standard linear bushing KBMF-16-DD with square flange, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

Bore diameter:	16
Outer diameter:	26
Lenght:	36
Material:	standard

Similar products

PAW14-P200 - 250x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€360.26

GLE15-20-500

Heavy-duty spherical-plain bearing GLE.., sliding combination steel - DURBAL-Glide (polyamid-PTFE-fibreglass-compound), series E, maintenance-free, Durbal

€26.05

KB16-PP-AS

Linear ball bearing KB.. for shaft guidance systems, machined range, closed design, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, relubricatable, INA

€31.51

AX1326

Axial needle roller bearing AX.., thin series, single-row axial needle roller cage with built-in thin washer, Nadella

€8.02

6000-C-2Z

Single row deep groove ball bearing 60.., radial, with steel cage and sheet steel shields on both sides, FAG

€2.18

NKXR17-XL

Needle roller/axial cylindrical roller bearing NKXR.., combined axial radial bearings, without inner ring, single direction axial component with ball cage, without protective cap, INA

€44.90

Sold out

BK2016-AS1

Standard drawn cup needle roller bearing BK.., radial needle roller bearings, to DIN 618/ISO 3245, single row, with closed end, with steel cage, without seal, with lubrication hole INA

€17.96

Details

Sold out

KR26-X-B-NMT

Stud type track roller KR..X without eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with cylindrical profile, gap seals on both sides, incl. nut and lub. nipple, INA

€35.98

Details

Sold out

KS16

Linear ball bearing KS.. for shaft guidance systems, heavy-duty series, closed design, angle-adjustable, without seals, relubricatable, INA

€21.78

Details

3803-B-2RS-TVH-HLC

Double row angular contact ball bearing 38.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, seals on both sides, FAG

€19.28

Sold out

GCR26-SW

Full complement single row track roller GCR.. with threaded stud, profiled outer ring with optimized radius, eccentric, without seals, incl. lock washer and nut, Nadella

€91.06

Details

Sold out

R067211640

Super linear bushing KBB-16-D without misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with wiper seal on one side, Rexroth

€35.42

Details

R067021640

Super linear bushing KBA-16-DD with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with wiper seal on one side, Rexroth

€36.40

PAW14-P14 - 1000x

Thrust washer PAW.., maintenance-free plain bearing, standard material P14 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, little wear, low friction value, no tendency to fuse with metal, KS Permaglide®

€641.55

DPHSL10 M10x1,25

Standard rod end DPHSL.. with pressed spherical plain bearing, sliding pair steel-brass, series K, female left hand thread, zinc plated, relubricatable, Durbal

€7.19