R133151200

Bore diameter:	12
Outer diameter:	20
Width:	3

EMN06-20-501

Heavy-duty rod end EMN.. with pressed spherical-plain bearing, sliding pair steel-steel, series E/EH, male right hand thread, zinc plated, relubricatable, Durbal

€15.44

DL1412

Full complement needle bush DL.., oped design, needles retained, thin hardened calibrated outer ring made of drawn strip steel, without inner ring, Nadella

€13.04

Sold out

R066801230

Segmental linear bushing KBSE-12-NR, linear bushings, closed design with reinforced plastic housing, hardened steel segments und balls made of stainless steel, guide cage and retaining rings made of PA11, without wiper selas, without grease, Rexroth

€21.10

Details

IR17X20X20-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€5.21

Sold out

IR15X20X23-EGS

Inner ring IR..-EGS for needle roller bearings, cylindrical, made of hardened rolling bearing steel, surface ground without twist, without lubrication hole, INA

€13.02

Details

BK1414-RS-L271

Standard drawn cup needle roller bearing BK.., radial needle roller bearings, to DIN 618/ISO 3245, single row, with closed end, with steel cage, with seal, INA

€5.15

HK1416-2RS-L271

Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, single-row design, sealed on both sides, with steel cage, without lubrication hole, INA

€4.58

PAP1820-P10 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€87.02

PAP1820-P10 - 1x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

Price on request

PAP1815-P11 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€1,107.11

PAP1815-P200 - 100x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€201.75

PAP1815-P200 - 2500x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€3,534.38

PAP1820-P20 - 5000x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P20 with steel backing, for grease or liquid-lubricated applications: contains lead, with oil distributing pockets, ready to install, lifetime lubrication possible, low wear, low sensitivity to edge loading, good damping characteristics, insensitive to impact loads, good chemical resistance, KS Permaglide®

€4,911.08

PAP1810-P180 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€1,651.65

PAP1810-P180 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€171.97

Product information "R133151200"