RNA4911

Bore diameter:	63
Outer diameter:	80
Width:	25
Cage:	steel cage
Material:	standard

Sold out

KR80-X-PP-A-NMT

Stud type track roller KR..X without eccentric, outer ring with cylindrical profile, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€146.33

Details

ASNU35 - USNU35

Built-in roller freewheel USNU.., dimensions according to ball bearing 63.., non self-centering (non bearing supported), one keyway on the inner ring, CTS

€165.37

Sold out

FGL4080-EEM-SW

Full complement single row track roller FGL.. without pin, thick-walled optimized cylindrical outer ring, lubrication hole on inner ring, metal shielded, Nadella

€256.08

Details

Sold out

KR80-EE

Cam follower KR.. with concentric pin, with cage-guided needles and convex outer ring, plastic seals on both sides, with hexagon socket, incl. clamping nut, Nadella

€218.12

Details

Sold out

GCUL80-MM

Full complement single row track roller GCUL.. with threaded stud, with cylindrical outer ring, concentric, metal shielded, incl. lock washer and nut, Nadella

€323.66

Details

Sold out

FGUL4080-MM

Full complement single row track roller FGUL.. without pin, light series, with cylindrical outer ring, non-separable, metal shielded, Nadella

€310.11

Details

PAP7540-P10 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€647.35

Sold out

2307-M

Self-aligning ball bearing 23.., double row radial ball bearings, cylindrical bore, open, with brass cage, not greased, FAG

€142.87

Details

PAP7540-P10 - 1x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€13.67

PAP7540-P10 - 5x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€66.98

Sold out

3307-BD-XL-C3

Double row angular contact ball bearing 33.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, open design with steel cage, FAG

€52.02

Details

PAP7540-P200 - 25x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€705.49

Sold out

QJ208-XL-MPA-T42A

Four-point contact bearing QJ2.., radial ball bearings, single row, non self-retaining, solid outer ring without retaining grooves, split inner ring, with brass cage, open design, FAG

€59.07

Details

PAP7540-P180 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€6,496.43

PAP7580-P180 - 5x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€165.20

Product information "RNA4911"