SL185015-A

Bore diameter:	75
Outer diameter:	115
Width:	54
Cage:	full-complement
Bearing clearance:	CN (normal)
Material:	standard

NCF3015-V

Single row cylindrical roller bearing, support bearing, two fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling set, IDC

€122.41

CLK400 75x115

High-quality internal clamping set CLK400, backlash-free shaft-hub connection, self-centering design: radial standard height - axially long, mounting without axial hub displacement, for very high torques, CMT Line

€151.60

Sold out

RKULR115

Floating guide roller RKULR.. with tapered roller bearing, convex raceway side, radius R = 400, eccentric,, sealed on both sides, incl. lock washers and nuts, Nadella

€727.66

Details

6015-2Z

Single row deep groove ball bearing 60.., radial, with steel cage and sheet steel shields on both sides, FAG

€37.30

ZKLF50115-2RS-PE

Double row axial angular contact ball bearing, precision bearings for screw mounting, with fixing holes, less stringent bearing design, seals on both sides, INA

€495.04

IR100X115X40-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€68.01

GS81216

Housing locating washer GS812.., thrust bearing washers, externally centered, made from through-hardened rolling bearing steel, raceways precision ground, bore and outside diameter precision machined, INA

€42.32

NU1015-XL-M1-C3

Single row cylindrical roller bearing NU1.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with two-piece roller guided brass cage, FAG

€135.36

PAP110115-P180 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€1,359.53

PAP11060-P180 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€1,757.63

Sold out

LF25

Adjusting nut LF.., spring nuts for precise adjustment, axial locking, standard clamping system with two clamping screws on one spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€173.32

Details

CLK200 75x115

High-quality internal clamping set CLK200, backlash-free shaft-hub connection, non-self-centering design: radial standard height - axial short width, mounting without axial hub displacement, for medium to high torques, CMT Line

€43.20

Sold out

RKU115-NX

Corrosion-resistant guide roller RKU.. with tapered roller bearing, locating roller, convex raceway side, radius R = 400, concentric, sealed on both sides, incl. lock washers and nuts, Nadella

€1,918.70

Details

SL185015-A-C3

Double row cylindrical roller bearing SL1850.. with full complement rolling set, support bearing, three fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, INA

€236.87

HSS7015-E-T-P4S-UL

High-speed spindle bearing HSS70.., with size-reduced steel balls, contact angle α = 25°, universal pairing, sealed on both sides, FAG

€317.42

Product information "SL185015-A"